Using two wires, the Penn Elcom Dim-to-Warm feature changes the CCT from 3000K (warm white) to 1800K (ultra warm amber light also called candlelight) as the LED strip is dimmed from 100% to 3%. It has a High-density design with both warm white and cold white each containing 126LED/m. It can be dimmed by direct dimming with a PWM (Pulse-Width Modulation) output type of 24V driver.
Application:
Indirect decorative lighting for display, shelving, cabinets, hallways, stairs, coves, ceiling coffers and architectural details.
Accessories:
LEDPL-D2W-10MM-CONN – Penn PCB connector 5.9" (150mm)
LEDPL-D2W-10MM-JOIN – Penn PCB joiner 5.9" (150mm)
CA2F20 - 2 core flat cable for low voltage LED applications (0.75 mm²)
Control options:
Line voltage dimming (aka Phase Cut / Triac): Osram/Inventronics 36W 1ch driver LEDOTFIT3624PC, Osram/Inventronics 75W 1ch driver LEDOTFIT7524PC, Osram/Inventronics 150W 1ch driver LEDOTFIT15024PC
DALI Premium: Osram/Inventronics 30W 1ch driver LEDOTIDALI30CH1, Osram/Inventronics 50W 1ch driver LEDOTIDALI50G3CH4, 80W 1ch driver LEDOTIDALI80CH1, 160W 1ch driver LEDOTIDALI160G3CH1, 360W* 4ch dimmer LEDITD0P4CNFC
DALI Cost-effective: Osram/Inventronics 36W 1ch driver LEDITD03624VC, Osram/Inventronics 75W 1ch driver LEDITD07524VC, Osram/Inventronics 150W 1ch driver LEDITD015024VC, Osram/Inventronics 200W 1ch driver LEDITD020024VC
DMX: Osram/Inventronics 4ch dimmer LEDOTDMXRGBW or 5ch dimmer LEDOTDMXDIM5CH or FossLED 4ch dimmer LEDFLDC4YDMX + Wall controller LEDWP4RGBWN
Casambi: Osram/Inventronics 50W 4ch driver LEDOTWI504CHCA, 80W 4ch driver LEDOTWI804CHCA, 160W 2ch driver LEDOTWI1602CHCA, 288W* 5ch dimmer LEDITD0P4CNFC
RF: FossLED 1ch dimmer LEDFLDC1S + Single Color Hand Slider LEDFLCT1S
*with 24V LED strips
Important Notes:
*To ensure the effectiveness of system dimming, it is necessary to conduct a complete compatibility test on the power supply, dimmer, controller, and light strip.
Must be installed with a heat sink for cooling, for example aluminum extrusion designed for LED tape.
3M 300LSE adhesive tape is on the back of the LED strip.
One end of the LED strip has a 19.7" (500mm) factory soldered red/white silicon cable tail.
Available for UK and EU markets. Designed for 230V mains-powered control gear and certified to CE and UKCA.
Technical Specification:
- Part number: LEDPL-D2W-918930-14W
- Dimension (LxWxH): 196.9" (5000mm) x 0.4" (10mm) x 0.04" (1mm)
- IP rating: IP20
- Lumen output (± 10%): 1300 lm/m
- LED efficiency @3000K: 93lm/W
- Energy efficiency class of regulation (EU) 2019/2020: G for 3000K (CRI 90) in IP20
- LED strip cut-points: 2.2" (55.6mm)/ every 14 LED chips
- LED chips per meter: 252 LED's/m
- PCB type: 3oz white FPC, OSP
- Operating ambient temperature: -4 to 113 °F (-20 to 45 °C), storage -4 to 140 °F (-20 to 60 °C)
- Warranty: 5 years
- Lifespan: L70≥50,000 hours @Tc≤149 °F (65 °C)
- Certification: CE, UKCA
- Power consumption: ± 14W/m
- Input Voltage: 24VDC
- LED current: (29~35)mA/LED
- LED CCT: 1800-3000K (Dim-to-warm)
- Color Rendering Index (@ 3035K): ≥95
- R9 value (@ 3035K): 97
- Color Rendering Index (@ 1808K): ≥90
- R9 value (@ 1808K): 63
- Beam Angle: 120°
