Using two wires, the Penn Elcom Dim-to-Warm feature changes the CCT from 3000K (warm white) to 1800K (ultra warm amber light also called candlelight) as the LED strip is dimmed from 100% to 3%. It has a High-density design with both warm white and cold white each containing 126LED/m. It can be dimmed by direct dimming with a PWM (Pulse-Width Modulation) output type of 24V driver.
Application:
Indirect decorative lighting for display, shelving, cabinets, corridor, stairs, coves, ceiling coffers and architectural details.
*To ensure the effectiveness of system dimming, it is necessary to conduct a complete compatibility test on the power supply, dimmer, controller, and light strip. Must be installed with a heat sink for cooling, for example aluminium extrusion designed for LED tape. 3M 300LSE adhesive tape is on the back of the LED strip. One end of the LED strip has a 500mm factory soldered red/white silicon cable tail.
Technical Specification:
Part number: LEDPL-D2W-918930-14W
Dimension (LxWxH): 5000mm x 10mm x 1mm
IP rating: IP20
Lumen output (± 10%): 1300 lm/m
LED efficiency @3000K: 93lm/W
Energy efficiency class of regulation (EU) 2019/2020: G for 3000K (CRI 90) in IP20
Penn Elcom has supplied the professional lighting trade for a long time. But this LED tape is our own: a range of four strips, developed by our LED team to a single, consistent standard. Every strip runs on 24V, renders colour at CRI 90 or above, and uses a high LED count per metre for a smooth, even line of light...
