3U Black Hinged Vented Rack Panel with Slam Lock for 1/8" Rails

In stock
Part No
R1372/3UVK
Was: $95.01 Was: $85.59 Save: 10% $85.59
3U Black Hinged Vented Rack Panel with Slam Lock. 

For use with 0.12" Rack Rails: R0828 Family.

The R1372/3UVK is a 3U hinged vented rack panel, also known as a rack door, that spans three rack spaces and opens on a keyless slam lock for tool-free access. It is built specifically for 0.12" (3mm) rack rail.

Pressed from 1.2mm steel in black, 19" (482.6mm) wide and 0.59" (15mm) deep. It fixes to one front rail with two screws at the top and bottom of its span, and the slam lock catches on the flange of the rail opposite, so it swings clear without a separate hinge. The fixing slots are obround, giving room to line it up squarely.

  • 63% free area: 5/32" holes on a 3/16" 60° staggered pitch
  • The slam lock is keyless, so it holds the panel closed and keeps the rack front tidy
  • Fits either way round, so the door swings from the left or the right
  • Mounting hardware not included: use cage nuts and screws, or screws alone if your rack rail is tapped
For use with 0.12" (3mm) rack rail: the R0828 family. For 0.06" (1.5mm) and or 0.08" (2mm) rails, use the R1272 range. For a lockable rack door, see the R1298 range.

Explore the full range of hinged rack panels and rack doors.

Specification
  • Rack Spaces: 3U
  • Height: 5.22" (132.7mm)
  • Width: 19" (482.6mm)
  • Depth: 0.59" (15mm)
  • Material: Steel 1.2mm
  • Finish: Black
  • Perforation: 5/32" (3.97mm) holes, 3/16" (4.76mm) 60° staggered pitch
  • Free Area: 63%
  • Slam Lock: Keyless (R1291-D-LOCK)
  • Rail Compatibility: 0.12" (3mm)
  • Mounting: Two screws to one front rail, latch engages the opposite rail flange
  • Mounting Hardware: Not included
  • Weight: 1.29lb (585g)
Technical Information
3D Model View 3D Drawing
Size (U) 3U
Weight 1.3lbs
Finish Black
Customer Questions
Is it possible to retrofit the R1372/3UVK or get this with lock and key?
Unfortunately this is not a standard option, as the panel locks into the rack strip Regards Penn Elcom
Will these R1372/3UVK hinged rack panels mount in front of rack shelves? If so, will it also mount in front of the sliding shelves, and if so, can the shelves slide in and out when the hinged door is open?
Thank you for your enquiry, Unfortunately these do not work in front of a shelf these latch into the rack strip. We do offer a custom metal service, if you would like a quote please email us at [email protected] Regards Penn Elcom...
Would I be able to mount 2 X 120mm fans on the back of it? Would the vent holes line up for the fan mounts?
This product is not made for additional mounting without modification, and we are unable to recommmend its suitability for this project. We also sadly cannot confirm without further dimensional data that the fan units could match up.
Please, mind that only logged in users can submit questions
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
For price, stock availability and other information about this product, please contact us using the form below.

sgm_clp_1 div for segmentify