Led Driver Ot 20/220-240/24 Dim P 24v 20w 1-10V dimmable 6977770438347

CV Power supplies 24 V with 1-10 V
Product benefits:
Large range of products from 20 W to 250 W
Installation in very cold and hot environments
Very stable output power
High electronic reversible short-circuit, overload, over temperature protection
Smart Power Supply boosting power to turn on cold LEDs
Independent installation possible
Dimming range 1-100 %

Product features:
DC mode functionality
Type of protection IP66 and IP67
Surge protection: up to 4 kV (L-N) / 6 kV (L/N-PE)
Wide operating temperature range -30 +55 C
Lifetime up to 50000 h (temperature at max. tc)
Dimmable via fully isolated 1-10 V interface

Areas of application:
Facades, public squares, cruise ships
Signage
Suitable for indoor and outdoor installations

Nominal voltage: 220-240 V
Mains frequency: 50-60 Hz
Input voltage AC: 198-264 V
Total harmonic distortion: < 15 %
Power factor: 0.95
ECG efficiency: 83 %
Device power loss: 3.4 W
Power loss in stand-by mode: <0.5 W
Inrush current: 20 A
Max. ECG no. on circuit breaker 10 A (B): 49
Max. ECG no. on circuit breaker 16 A (B): 77
Surge capability (L-N): 4 kV
Nominal output voltage: 24.2 V
Galvanic isolation: SELV
Length: 178.0 mm
Width: 43.0 mm
Height: 25.0 mm
Mounting hole spacing, length: 169.0 mm
Product weight: 315 g
Cable cross-section, input side: 1.0 sqmm
Cable cross-section, output side: 1.0 sqmm
Wire preparation length, input side: 90 mm
Ambient temperature range: -30 +55 C
Maximum temperature at tc test point: 85 C
Dimmable: Yes
Dimming interface: 1…10 V
Dimming range: 1…100 %
Dimming method: Pulse Width Modulation
Suitable for fixtures with prot. class: II
Type of connection, output side: Cables
Number of channels: 1
Overheating protection: Yes
Overload protection: Yes
Short-circuit protection: Yes
Intended for no-load operation: No