Led Driver Ot 20/220-240/24 Dim P 24v 20w 1-10V dimmable 6977770438347
Inventronics
Part No
LEDOT2024DIMP
CV Power supplies 24 V with 1-10 V
20W single channel LED power supply with build-in 1-10V dimming function
Product benefits:
Large range of products from 20 W to 250 W
Installation in very cold and hot environments
Very stable output power
High electronical reversible short-circuit, overload, over temperature protection
Smart Power Supply boosting power to turn on cold LEDs
Independent installation possible
Dimming range 1-100 %
Product features:
DC mode functionality
Type of protection IP66 and IP67
Surge protection: up to 4 kV (L-N) / 6 kV (L/N-PE)
Wide operating temperature range -22 to 131 °F (-30 to +55 °C)
Lifetime up to 50000 h (temperature at max. tc)
Dimmable via fully isolated 1-10 V interface
Areas of application:
Facades, public squares, cruise ships
Signage
Suitable for indoor and outdoor installations
EAN: 6977770438347 (Osram EAN was 4052899545809)
Technical Data:
Electrical data:
Nominal voltage: 220-240 V
Mains frequency: 50-60 Hz
Input voltage AC: 198-264 V
Total harmonic distortion: < 15 %
Power factor: 0.95
ECG efficiency: 83 %
Device power loss: 3.4 W
Power loss in stand-by mode: <0.5 W
Inrush current: 20 A
Max. ECG no. on circuit breaker 10 A (B): 49
Max. ECG no. on circuit breaker 16 A (B): 77
Surge capability (L-N): 4 kV
Nominal output voltage: 24.2 V
U-OUT (working voltage): 30 V
Output PSTLM: <1
Output SVM: <0.4
Nominal output power: 20 W
Maximum output power: 20 W
Galvanic isolation: SELV
Galvanic isolation primary/secondary: 3 kV
Dimensions & weight:
Length: 7.0" (178mm)
Width: 1.7" (43mm)
Height: 1.0" (25mm)
Mounting hole spacing, length: 6.7" (169mm)
Product weight: 0.7 lb (315g)
Cable cross-section, input side: 1.0 sqmm
Cable cross-section, output side: 1.0 sqmm
Wire preparation length, input side: 3.5" (90mm)
Wire preparation length, output side: 3.5" (90mm)
Colors & materials:
Casing material: Plastic
Temperatures & operating conditions:
Ambient temperature range: -22 to 131 °F (-30 to +55 °C)
Maximum temperature at tc test point: 185 °F (85 °C)
Max.housing temperature in case of fault: 230 °F (110 °C)
Temperature range at storage: -40 to 185 °F (-40 to +85 °C)
Permitted rel. humidity during operation: 5-85 %
Lifespan:
ECG lifetime: 50000 h
Capabilities:
Dimmable: Yes
Dimming interface: 1-10 V
Dimming range: 1-100 %
Dimming method: Pulse Width Modulation
Suitable for fixtures with prot. class: II
Type of connection, output side: Cables
Number of channels: 1
Overheating protection: Yes
Overload protection: Yes
Short-circuit protection: Yes
Intended for no-load operation: No
No-load proof: Yes
Certificates & standards:
Approval marks – approval: ENEC / RCM / CCC / EAC
Standards: EN 61347-1 / EN 61347-2-13 / EN 55015 / EN 61547 / EN 61000-3-2 / EN 61000-3-3 / EN 60598-1 / EN 62384
Type of protection: IP66 / IP67
Logistical data:
Commodity code: 85044083900
Applicable region: APAC (excl. China, India, Japan) / CHINA / EUROPE / MEA / SOUTH AMERICA
Environmental information:
Date of Declaration: 01-09-2026
Primary Article Identifier: 4052899545809 | 6977770438347
Declaration No. in SCIP: database In work
SCIP_STATUS: In work
| Type of Control/Dimming | 1-10V |
|---|---|
| Type of LED Driver | Constant Voltage |
| Weight | 410g |
Customer Questions
Write Your Own Review
For price, stock availability and other information about this product, please contact us using the form below.
For price, stock availability and other information about this product, please contact us using the form below.
sgm_clp_1 div for segmentify