XLR 5 Pin Male PCB IDC Tapped Hole NC5MDM3-H-PCB-IDC
Neutrik
Part No
CONC5MDM3HIDC
Was:
£23.33
£19.44
Save: 10%
Was:
£21.01
£17.51
Save: 10%
Now:
£21.01
£17.51
In stock
XLR 5 Pin Male PCB IDC Tapped Hole PCB adapters fitted with 4 or 5 pin male or female XLR chassis connectors terminated with IDC or screw terminals. For use where cables have been installed & wall...
XLR 5 Pin Male PCB IDC Tapped Hole
PCB adapters fitted with 4 or 5 pin male or female XLR chassis connectors terminated with IDC or screw terminals. For use where cables have been installed & wall plates or patch bays need fixing at high speed & in a cold (no soldering) environment.
The IDC terminals do not require a punch down tool and will accept 0.5 - 0.64 mm wire with a maximum OD of 1.8mm.
The depth behind the panel for the IDC version is 47.5mm, see NC4FDM3-H, NC4MDM3-H, NC5FDM3-H or NC5MDM3-H for other dimensions.
Priced per connector: available in any quantity
Packing information: box quantity = 100
PCB adapters fitted with 4 or 5 pin male or female XLR chassis connectors terminated with IDC or screw terminals. For use where cables have been installed & wall plates or patch bays need fixing at high speed & in a cold (no soldering) environment.
The IDC terminals do not require a punch down tool and will accept 0.5 - 0.64 mm wire with a maximum OD of 1.8mm.
The depth behind the panel for the IDC version is 47.5mm, see NC4FDM3-H, NC4MDM3-H, NC5FDM3-H or NC5MDM3-H for other dimensions.
Priced per connector: available in any quantity
Packing information: box quantity = 100
| Weight | 40g |
|---|
Customer Questions
Write Your Own Review
Question about this product?
For price, stock availability and other information about this product, please contact us using the form below.
sgm_clp_1 div for segmentify