Led Oti Dali2 30/220-240/24 1 Channel Dim 4062172329767

OTi DALI 30/220-240/24 1CH

EAN: 4062172329767

Optional orange cable clamp
B-style for independent mounting to be ordered separately

Product family features

CV Power supplies with DALI

Dimmable via Touch DIM

LED driver whose output power can be shared arbitrarily

among the 2 or 4 channels

Dimming range: 0.1…100 %

Line frequency: 0 Hz | 50 Hz | 60 Hz

Product family benefits

Intelligent power matching thanks to Smart power supply

Slim form factor for mounting on the cove or in linear luminaires

No stroboscopic effect thanks to patented high PWM frequency management (> 2
kHz)

Suitable for installation in emergency lighting systems according to EN
60598-2-22

Available as single-channel or multi-channel with DT6 and DT8 in one device

DALI message detection "LED Module failure"

IP rating: IP20

Areas of application

Cove lighting, wall washer, corridor, handrail, luminous ceilings

Suitable for use in luminaires of protection class I and II

Electrical data

Nominal input voltage: 220…240 V

Mains frequency:  50/60 HZ Hz

Input voltage AC:  198…264 V

Total harmonic distortion:  < 10 %

Power factor:  λ 0.32…0.95

Efficiency in full-load:  > 88 % (at 230V, 50 Hz)

Device power loss:  4.5 W

Networked standby power:  <0.50 W (at 230V, 50 Hz)

Inrush current:  40 A

Max. ECG no. on circuit breaker 10 A (B):  20

Max. ECG no. on circuit breaker 10 A (C):  32

Max. ECG no. on circuit breaker 16 A (B):  31

Max. ECG no. on circuit breaker 16 A (C):  52

Max. ECG no. on circuit breaker 25 A (B):  81

Surge capability (L/N-Ground):  2 kV

Surge capability (L-N):  1 kV

Nominal output voltage:  24.2 V (DC voltage)

U-OUT (working voltage): 24.2 V

Nominal output power: 30 W

Maximum output power: 30 W (at steady state)

Galvanic isolation: SELV

Input voltage: DC 176…276 V

Output PWM frequency: > 3000 Hz

Output ripple Voltage (100 Hz): < 1 %

Dimensions & weight

Mounting hole spacing, length:  94.0 mm

Product weight: 155.00 g

Cable cross-section, input side:  0.5…1.5 mm²

Cable cross-section, output side:  0.5…1.5 mm²

Wire preparation length, input side:  7.0 mm

Wire preparation length, output side:  7.0 mm

Mounting hole spacing, width:  58.0 mm

Length:  103.0 mm

Width:  67.0 mm

Height:  29.5 mm

Colors & materials

Casing material:  Plastic

Temperatures & operating conditions

Ambient temperature range:  -20…+45 °C

Maximum temperature at tc test point:  80 °C

Max.housing temperature in case of fault : 110 °C

Temperature range at storage:  -40…+85 °C

Permitted rel. humidity during operation: 5…85 % (Maximum 56 days/year at 85%)

Lifespan

ECG lifetime: 50000 h

Capabilities

Dimmable:  Yes

Dimming interface:  DALI

Dimming range:  0…100 %

Dimming method:  Pulse Width Modulation

Overheating protection:  Automatic reversible

Overload protection:  Automatic reversible

Short-circuit protection:  Automatic reversible

No-load proof:  Yes

Intended for no-load operation:  No

Suitable for fixtures with prot. class:  I / II

Type of connection, input side:  Plug-in connection

Type of connection, output side:  Plug-in connection

Control interface:  DALI-2

Number of channels:  1

Programming

Tuner4TRONIC:  Yes

Certificates & standards

Approval marks – approval:  CE / CCC / BIS / ENEC / EL / ENEC 25 / RCM /
UKCA

Standards:  Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN

61547/Acc. to EN 61000-3-2/Acc. to EN 62384/Acc. to

EN 60598-2-22/Acc. to EN 62386/Acc. to EN 55015

Protection class: II

Type of protection: IP20

Logistical data

Commodity code:  850440839000

Environmental information

Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration:  28-03-2023

Primary Article Identifier:  4062172329767

Candidate List Substance 1:  Lead

CAS No. of substance:  1 7439-92-1

Safe Use Instruction:  The identification of the Candidate List substance
is

sufficient to allow safe use of the article.

Declaration No. in SCIP database:  00655979-2845-4498-83fd-fa3355affbc4