Led Driver OT FIT 14/220-240/350 CS PC Phasecut dimmable 6937186111296
Inventronics
Part No
LEDOTFIT14350CSPC
OT FIT 14/220-240/350 CS PC
Constant Current SELV drivers with leading- or trailing-edge dimming.
The compatibility with the most common leading-edge and trailing-edge phase dimmers and the possibility of dimming from 5-100% marks one of the key characteristics. Others include a cable clamp for independent installations and DIP switches for 4 output currents per wattage.
Orange cable clamps included with the driver. This allows independent mounting of the driver.
EAN: 6937186111296 (Osram EAN was 4062172286503)
Perfect match for the Inventronics PrevaLED Coins 1400 & 2000 (2.0" (50mm)):
G2: 24Deg 3000K 1400lumens LEDCOB140093024D & 40Deg 4000K 1400lumens LEDCOB140094040D
G3: 15Deg 2700K 1400lumens LEDCOB140092715DG3, 24Deg 2700K 1400lumens LEDCOB140092724DG3, 40Deg 2700K 1400lumens LEDCOB140092740DG3, 60Deg 2700K 1400lumens LEDCOB140092760DG3, 40Deg 3000K 1400lumens LEDCOB140093040DG3, 40Deg 3500K 1400lumens LEDCOB140093540DG3, 24Deg 2700K 2000lumens LEDCOB200092724DG3, 40Deg 2700K 2000lumens LEDCOB200092740DG3
Product family features:
Cable clamp housing for independent mounting
Dimmable on the leading edge and trailing edge
Housing for independent installation
Product family benefits:
Compatible with the most common leading-edge and trailing-edge phase dimmers
Flexible current setting (DIPswitch – 2 to 4 currents)
Flicker-free dimming
Higher quality of light thanks to < 5% output ripple current
Housing from 80% recycled plastic
Areas of application:
Decorative illumination
Downlights, flat luminaires
Hospitality
Living areas
Museums, residential buildings
Offices
Shop lighting
Suitable for indoor SELV installations
Suitable for luminaires of protection class I and II
Electrical Data:
Nominal voltage: 220 - 240 V
Mains frequency: 50 - 60 Hz
Input voltage AC: 198 - 264 V
Total harmonic distortion: < 20 %
Power factor λ (full/minimum load at 230 V): 0.9C/ 0.95
ECG efficiency (full load at 230 V): 81 %
Device power losses (max): 3.5 W
Inrush current: < 10 A
Nominal output power: 14 W
Partial load: 5.4 - 14 W
Nominal output voltage: 27 - 40 V
Nominal output current: 200 / 250 / 300 / 350 mA (+/- 7.5%)
Max. ECG no. on circuit breaker 10 A (C): 132
Max. ECG no. on circuit breaker 10 A (B): 80
Max. ECG no. on circuit breaker 16 A (C): 212
Max. ECG no. on circuit breaker 16 A (B): 128
Surge capability (L/N-Ground): 2 kV
Surge capability (L-N): 1 kV
U-OUT (working voltage): 60 V
Output current tolerance: ±7.5 %
Output ripple current (100 Hz): < 5 %
Output PSTLM: ≤1
Output SVM: ≤0.4
Default output current: 350 mA
Galvanic isolation primary/secondary: SELV
Current set: DipSwitch
Dimensions & weight:
Product weight: 0.1 lb (60g)
Cable cross-section, input side: 0.75 - 1.5 sqmm
Cable cross-section, output side: 0.75 - 1.5 sqmm
Wire preparation length, input side: 0.3-0.4" (8-9mm)
Wire preparation length, output side: 0.3-0.4" (8-9mm)
Length: 5.1" (130mm)
Width: 1.2" (30mm)
Height: 0.9" (22.2mm)
Colors & materials:
Casing material: 80% recycled plastic
Temperatures & operating conditions:
Ambient temperature range: -4 to 122 °F (-20 to +50 °C)
Temperature range at storage: -40 to 185 °F (-40 to +85 °C)
Maximum temperature at tc test point: max. 158 °F (+70 °C)
Max.housing temperature in case of fault: 230 °F (110 °C)
Permitted rel. humidity during operation: 5-85 %
Lifespan:
ECG lifetime (at Tcase = 158 °F (70 °C) at Tc point/10-% failure rate): 35000 h
ECG lifetime (at Tcase = 140 °F (60 °C) at Tc point/10-% failure rate): 50000 h
Capabilities:
Dimmable: Yes
Dimming interface: Phase Cut (Leading edge/Trailing edge)
Dimming range: 5 - 100 %
Suitable for fixtures with prot. class: I / II
Dimming method: Amplitude Modulation
Overheating protection: Automatic reversible
Overload protection: Automatic reversible
Short-circuit protection: Automatic reversible
No-load proof: Yes
Intended for no-load operation: No
Max. cable length to lamp/LED module: 6.6 ft (2m)
Type of connection, input side: Push terminal
Type of connection, output side: Push terminal
Suitable for through-wiring: No
Number of channels: 1
Programming:
Programming device: DIPswitch
Certificates & standards:
Approval marks – approval: CCC / CE / UKCA / ENEC
Standards: Acc. to IEC 61347-1/Acc. to IEC 61347-2-3/Acc. to IEC 62384/Acc. to IEC 61547/Acc. to IEC 61000-3-3/Acc. to EN 61000-3-2
Protection class: I,II
Type of protection: IP20
Logistical data:
Commodity code: 85044083900
Programming device: DIPswitch
Certificates & standards:
Approval marks – approval: CCC / CE / UKCA / ENEC
Standards: Acc. to IEC 61347-1/Acc. to IEC 61347-2-3/Acc. to IEC 62384/Acc. to IEC 61547/Acc. to IEC 61000-3-3/Acc. to EN 61000-3-2
Protection class: I,II
Type of protection: IP20
Logistical data:
Commodity code: 85044083900
| Type of Control/Dimming | Mains (Phase-cut) |
|---|---|
| Type of LED Driver | Constant Current |
| Weight | 2.12oz |
Customer Questions
Write Your Own Review
For price, stock availability and other information about this product, please contact us using the form below.
For price, stock availability and other information about this product, please contact us using the form below.
sgm_clp_1 div for segmentify