The MDK15-150X80 is a modular tray divider kit for creating adjustable compartments inside a 59.1" x 31.5" (1500 x 800mm) tray, for Kardex and other vertical lift modules (VLMs) and storage carousels. It is a self-assembly system in 0.028" (0.7mm) steel: a frame, long dividers running front to back, and cross dividers that clip between them.
Features:
Fits trays with a 59.1" x 31.5" (1500 x 800mm) nominal footprint
Frame external size 59.2" x 31.7" (1503 x 804mm)
5.9" (150mm) compartment height
Long dividers reposition across the frame in 2.0" (50mm) increments to set lane width
Cross dividers locate on the long dividers' 7.9" (200mm) slot pitch to set compartment depth
Up to 3 cross dividers per lane, for up to 4 compartments front to back
Sold as a complete kit, all components also sold separately
Configure the layout to your stock, then reconfigure it whenever your inventory changes rather than buying a new insert. Check your tray's internal size against the frame's external size before ordering. Part of the MDK range, so you can add matching frames, long dividers and cross dividers to expand or rebuild any tray.
A Kardex vertical lift module (VLM) saves floor space and brings inventory to the operator, but an open tray of loose parts can undo much of that efficiency. Parts drift out of position, pickers spend time searching, and it becomes harder to see what is actually in stock. Dividing each tray into fixed, clearly defined compartments is one of the simplest ways to keep a VLM working as it should...