9.5mm High Quality Film Faced Birch Plywood with Blue Textured Phenolic Face, Black Smooth Reverse
In stock
Part No
M846209
9.5mm film-faced birch plywood with a fine textured matt-blue phenolic face (RAL 5010) and a black smooth back. A low-sheen, fingerprint-resistant surface for cases and cabinets where a flat, non-reflective finish matters. Supplied as a standard 8 × 4 sheet (2440 × 1220mm).
The textured face hides handling marks and cuts glare; the smooth reverse cleans easily and takes hardware. Built from five or more layers of cross-bonded birch veneer, with a hard phenolic film that resists scratches, abrasion, chemicals and UV. The film is the water-resistant barrier, so seal cut edges and drilled holes for continued protection in damp conditions.
Note: the textured face is blue; the reverse is black smooth (not blue).
- Face: 185gsm Matt Blue Textured Phenolic (RAL 5010)
- Reverse: 185gsm Matt Black Smooth Phenolic
- Edges Sealed With Black Paint
- Width: 1220mm
- Length: 2440mm
- Nominal Thickness: 9.5mm
- Finish: Blue
- Pattern: Textured
- Face Grain: runs along the 2440mm edge
- Core: birch plywood, five or more layers of cross-bonded birch veneer
- Weight Per Sheet: 19kg
- Bonding: phenol-formaldehyde resin; meets EN 13986 & EN 314-3
- Formaldehyde: E1 + CARB Phase 2
- Certification: FSC Mix 96% (responsible forestry)
- Resistance: water-, chemical- and UV-resistant film surface
| Data Sheet | Textured Phenolic Laminated Panels - Penn Elcom |
|---|---|
| Backing | Yes |
| Texture | Textured / Smooth |
| Nominal Thickness | 9.5mm |
| Wood | Birch Plywood |
| Weight | 19kg |
| Dimensions | 2.44mx1.22m |
| Laminate | Phenolic |
| Finish | Blue / Black |
Customer Questions
Write Your Own Review
For price, stock availability and other information about this product, please contact us using the form below.
sgm_clp_1 div for segmentify
