9.5mm High Quality Film Faced Birch Plywood with Blue Textured Phenolic Face, Black Smooth Reverse
9.5mm film-faced birch plywood with a fine textured matt-blue phenolic face (RAL 5010) and a black smooth back. A low-sheen, fingerprint-resistant surface for cases and cabinets where a flat, non-reflective finish matters. Supplied as a standard 8 × 4 sheet (2440 × 1220mm).
The textured face hides handling marks and cuts glare; the smooth reverse cleans easily and takes hardware. Built from five or more layers of cross-bonded birch veneer, with a hard phenolic film that resists scratches, abrasion, chemicals and UV. The film is the water-resistant barrier, so seal cut edges and drilled holes for continued protection in damp conditions.
Note: the textured face is blue; the reverse is black smooth (not blue).
- Face: 185gsm Matt Blue Textured Phenolic (RAL 5010)
- Reverse: 185gsm Matt Black Smooth Phenolic
- Edges Sealed With Black Paint
- Width: 1220mm
- Length: 2440mm
- Nominal Thickness: 9.5mm
- Finish: Blue
- Pattern: Textured
- Face Grain: runs along the 2440mm edge
- Core: birch plywood, five or more layers of cross-bonded birch veneer
- Weight Per Sheet: 19kg
- Bonding: phenol-formaldehyde resin; meets EN 13986 & EN 314-3
- Formaldehyde: E1 + CARB Phase 2
- Certification: FSC Mix 96% (responsible forestry)
- Resistance: water-, chemical- and UV-resistant film surface
| Data Sheet | Textured Phenolic Laminated Panels - Penn Elcom |
|---|---|
| Backing | Yes |
| Texture | Textured / Smooth |
| Nominal Thickness | 9.5mm |
| Wood | Birch Plywood |
| Weight | 19kg |
| Dimensions | 2.44mx1.22m |
| Laminate | Phenolic |
| Finish | Blue / Black |
Customer Questions
Write Your Own Review
For price, stock availability and other information about this product, please contact us using the form below.
For price, stock availability and other information about this product, please contact us using the form below.
sgm_clp_1 div for segmentify
