18U Rack Strip Tapped to M6 2mm Thick
Available
Part No
R0863/M6-18
The R0863/M6-18 is an 18U single rack strip with M6 threaded holes in 2mm steel, for bolting 19-inch equipment directly into racks, cabinets and flight cases without cage nuts.
Manufactured by Penn Elcom, the rack strip is punched to the EIA-310 1U pitch (44.45mm) and unit-marked for accurate positioning. Holes are pre-tapped to M6 at three positions per U for direct fixing where cage nuts aren't wanted. Sold as a single rail - fit two at the front of a rack, or four for front and rear support.
Specification
Specification
- Size: 18U
- Overall length: 803.3mm
- Hole type: M6 threaded, 3 per U - for direct fixing
- Material: 2mm steel
- Finish: Black powder coat
- Weight: 559g
- Standard: EIA-310, 1U = 44.45mm
- Sold as: Single rail
| Size U | 10U |
|---|---|
| Length | 80.33cm |
| Thickness | 2mm |
| Material | Steel |
| Type | R0863 Series |
| Weight | 559g |
| Hole Types | M6 Threaded Holes |
| Finish | Black |
Customer Questions
Write Your Own Review
For price, stock availability and other information about this product, please contact us using the form below.
sgm_clp_1 div for segmentify