18U Rack Strip Tapped to M6 2mm Thick
Part No
R0863/M6-18
The R0863/M6-18 is an 18U single rack strip with M6 threaded holes in 2mm steel, for bolting 19-inch equipment directly into racks, cabinets and flight cases without cage nuts.
Manufactured by Penn Elcom, the rack strip is punched to the EIA-310 1U pitch (44.45mm) and unit-marked for accurate positioning. Holes are pre-tapped to M6 at three positions per U for direct fixing where cage nuts aren't wanted. Sold as a single rail - fit two at the front of a rack, or four for front and rear support.
Specification
Specification
- Size: 18U
- Overall length: 803.3mm
- Hole type: M6 threaded, 3 per U - for direct fixing
- Material: 2mm steel
- Finish: Black powder coat
- Weight: 559g
- Standard: EIA-310, 1U = 44.45mm
- Sold as: Single rail
| Size U | 10U |
|---|---|
| Length | 80.33cm |
| Thickness | 2mm |
| Material | Steel |
| Type | R0863 Series |
| Weight | 559g |
| Hole Types | M6 Threaded Holes |
| Finish | Black |
Customer Questions
Write Your Own Review
For price, stock availability and other information about this product, please contact us using the form below.
For price, stock availability and other information about this product, please contact us using the form below.
sgm_clp_1 div for segmentify