OpticalCon Chassis Hard Black with shell gnd NO2-4FDW-1-A

Neutrik

Part No
CONO24FDW1A
£95.45 £79.54
In stock
OpticalCon Chassis Hard Black with shell gnd

Chassis connector with black chromium plating, 4 solder contacts, 1 LC-Duplex feedthrough socket and 1 shell ground contact (for SMPTE cable shield), waterproof acc. to IP 65, front panel mount
 
The chassis connector acts as a feed-through allowing simplified installations by connecting a conventional LC-Duplex on the rear. It is built in the standard D size shell and features an automatic sealing cover for maximum dust and dirt protection and a Push-Pull locking mechanism for safe connection. 
 
Not compatible to SMPTE 344M standard. Suitable for indoor (studio) camera links considering specific conditions acc. to IEC 60664-1 like pollution degree 1, overvoltage category 1 and rated voltage.
 
Features & Benefits: 
Suggested OEM equipment connector due to LC front compatibility
Designed as feedthrough with automatic sealing shutter
Shutter with silicone gasket protects optical connection from dust and dirt
Suitable for indoor (studio) camera links considering specific conditions acc. to IEC 60664-1 like pollution degree 1, overvoltage category 1 and rated voltage
Accommodates standard LC connectors on the rear for simple installation
Connection on the front side either by rugged opticalCON or standard LC connector
The low cost of the chassis connector makes it a viable alternative to traditional connectors in fixed installations
Water resistant according to IP65 ingress protection in mated condition
In case of limited space the chassis can be mounted without rubber gasket. IP rating for this is IP52.
 
Color coded rubber sealing to identify fiber mode:
Multimode - black
Single mode PC - blue
Single mode APC - green
Technical Information
Weight 40g
Customer Questions
No Questions
Did you find what you were looking for?
Write Your Own Review
You're reviewing:OpticalCon Chassis Hard Black with shell gnd NO2-4FDW-1-A
Your Rating
For price, stock availability and other information about this product, please contact us using the form below.

sgm_clp_1 div for segmentify