Skip to the beginning of the images gallery

1U Racklade met 2 Slam Locks

Wees de eerste om dit product te beoordelen

Part No

R1291K/2L

€ 77,11 € 64,26

Op voorraad

Details

1U racklade met 2 Slam Locks Kan ondersteboven worden gebruikt als plank.

Afmetingen binnenin:
Breedte × diepte × hoogte = 415 mm × 364 mm × 41 mm

Aanbevolen laadvermogen: 19 kg

Meer informatie

Meer informatie
3D Model	View 3D Drawing
Laadvermogen	19kg
Materiaal	1.2mm Staal
Grootte(U)	1U
Gewicht	3.18kg
Diepte	38cm
Finish	Zwart

Productvragen (10)

Vragen van klanten

Hello, Is there a positive stop on this R1291 drawer when pulled out ? Will it stop with out having to push in tabs or clips to remove it completely ? Thank you

The drawer will stop at its maximum extension, you have to push the clips to remove the tray

Lees verder

Do you make a 1 unit drawer with a lock and key?

Unfortunately a 1 unit drawer with a lock and key is not currently a product option in our range. However, we will be sure to express your interest to our designers and will add your suggestion to our product development list. Thank you for your question...

Lees verder

Does this also lock open? Is there another slide that locks in the open and closed position?

Thank you for your enquiry, The runers have slight stays locking in position when open, These are only friction stays. Regards PennElcomOnline

Lees verder

Hey looking for something like this but for a shallow 270mm deep rack unit, wonder if something like this would be available. Thanks Mike

Thank you for your enquiry, We do not have anything in the standard range, We do offer a custom metal service, If you would like a quotation please email us at [email protected] Regards Penn Elcom

Lees verder

is the 1U rack drawer available with a front silver finish?

Thank you for your enquiry, Yes all products are custmoisable, please email us with the quantity required and we will provide a suitable cost Regards Penn Elcom

Lees verder

is this R1291K/2L available with a front silver finish?

Thank you for your enquiry, We can offer a custom metal service. Please email us and we will provide a suitable quotation Kind Regards Penn Elcom

Lees verder

Do you do a 1U R1291 Drawer where the actual drawer length (front to back) is longer than 370mm (ideally nearer 500mm ?

Thank you for your enquiry, We offer the R1290-600/1UK which is 600mm / 23.62" deep Kind Regards Penn Elcom

Lees verder

Do you havea detailed dimension drawing of the panel, including the locks etc. We have an application where the amount of remaining space on the front panel, excluding locks is critical

Thank you for your enquiry regarding the R1291K/2L, Please visit the below link, You can download the full schemtic in 2d and 3d - https://www.3dcontentcentral.com/download-model.aspx?catalogid=6237&id=870598 Regards Penn Elcom

Lees verder

How far can the rear rack supports extend in order to connect to the rear of my rack?

According to our drawing it has a maximum extension of 15.94 inches / 405mm.

Lees verder

Will this work if the back isn't connected to any rails?

Sadly not that well. The slide function would not at all work as intended unless it was mounted from all 4 points.

Please, mind that only logged in users can submit questions

Jouw vraag:

Ik heb het privacybeleid gelezen en ga ermee akkoord

Jouw naam

ontvang een melding per e-mail wanneer het antwoord gereed is

Jouw email: