Skip to the beginning of the images gallery

Led Driver Switching only DR-SUP -60/220-240/24 Superior 60w 24v 4058075437807

LEDVANCE

LED DRIVER SUPERIOR | Constant voltage LED driver
DR-V -60/220-240/24

Product family benefits:
Perfectly matched to 24 V LED flexible strips
Long reliable life at maximum permitted temperatures
5 years guarantee
Maintenance-free operation and minimal installation costs
Quick and simple installation
High efficiency and reliability

Product family features:
Available in 30 W, 60 W, 100 W and 200 W
Integrated cable clamp for independent installation
Lifetime: up to 60,000 h (at max. tc temperature)
Type of protection: IP20
Low ripple current < 5%
Supply voltage: 220…240 V
Operating frequency: 50/60 Hz
Operated with less than 60 V: Safety extra-low voltage (SELV)
Reversible over temperature, overload, short-circuit and open-circuit protection

Areas of application:
Cove lighting, even in tight spaces
Wallwasher effect lighting in living rooms, dining rooms, bedrooms, entrances
Offices, shopping centers, hospitals, restaurants, hotels
For indoor SELV installations

EAN: 4058075437807

TECHNICAL DATA

Electrical data:

Nominal voltage: 220…240 V

Mains frequency: 50/60 Hz

Input voltage AC: 198…264 V 1)

Power factor λ: > 0.95 2)

ECG efficiency: 85 % 3)

Device power loss: 9.0 W 4)

Inrush current: 34 A 5)

Max. ECG no. on circuit breaker 10 A (B): 14
Max. ECG no. on circuit breaker 16 A (B): 22
Max. ECG no. on circuit breaker 25 A (B): 34

Surge capability (L-N): 1 kV

Nominal output voltage: 24 V 6)

Nominal output power: 60 W 7)

Galvanic isolation primary/secondary: 3.75 kV

1) Permitted voltage range
2) At full load
3) At full load and 230 V
4) At maximum LED load of 60 W
5) twidth = 272 μs typical (measured at 50 % Ipeak)
6) Maximum 24 V
7) From 1 to 60 W

Dimensions & Weight:
Length: 198.00 mm
Width: 43.00 mm

Height: 30.00 mm

Mounting hole spacing, length: 141.0 mm

Cable cross-section, input side: 0,5…1,5 mm²

Cable cross-section, output side: 0,5…1,5 mm²

Product weight: 192.00 g

Wire preparation length, input side: 8 mm
Prewired: No

Colors & materials:
Casing material: Plastic

Temperatures & operating conditions:
Ambient temperature range: -20…55 °C
Maximum temperature at tc test point: 90 °C
Max.housing temperature in case of fault: 110 °C
Permitted rel. humidity during operation: 5…85 %

Lifespan:
ECG lifetime: 60000 h 1)

1) At maximum Tc = 80°C / 10% failure rate

Additional product data:
Encapsulated: No

Capabilities:
Dimmable: No
Overheating protection: Yes
Overload protection: Yes
Short-circuit protection: Yes
Suitable for fixtures with prot. class: II

Max. cable length to lamp/LED module: 2.0 m

Type of connection, output side: Screw terminal

Certificates & Standards:
Approval marks – approval: CE / CB / ENEC
Standards: Acc. To IEC/EN61347-1/Acc. to IEC 61347-2-13/Acc. to GB 19510.1/Acc. to GB 19510.14/Acc. to EN 55015/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 61000-4-2, 3, 4, 5, 6, 8, 11/Acc. to IEC 61547/Acc. to IEC 62384
Type of protection: IP20

Logistical data:
Temperature range at storage: -40…+85 °C

Technical Information