Led Driver Switching only DR-SUP -60/220-240/24 Superior 60w 24v 4058075437807
LEDVANCE
In stock
Part No
LEDDRSUP6024
LED DRIVER SUPERIOR | Constant voltage LED driver
DR-V -60/220-240/24
Product family benefits:
Perfectly matched to 24 V LED flexible strips
Long reliable life at maximum permitted temperatures
5 years guarantee
Maintenance-free operation and minimal installation costs
Quick and simple installation
High efficiency and reliability
Product family features:
Available in 30 W, 60 W, 100 W and 200 W
Integrated cable clamp for independent installation
Lifetime: up to 60,000 h (at max. tc temperature)
Type of protection: IP20
Low ripple current < 5%
Supply voltage: 220…240 V
Operating frequency: 50/60 Hz
Operated with less than 60 V: Safety extra-low voltage (SELV)
Reversible over temperature, overload, short-circuit and open-circuit protection
Areas of application:
Cove lighting, even in tight spaces
Wallwasher effect lighting in living rooms, dining rooms, bedrooms, entrances
Offices, shopping centers, hospitals, restaurants, hotels
For indoor SELV installations
EAN: 4058075437807
Electrical data:
2) At full load
3) At full load and 230 V
4) At maximum LED load of 60 W
5) twidth = 272 μs typical (measured at 50 % Ipeak)
6) Maximum 24 V
7) From 1 to 60 W
Dimensions & Weight:
Length: 198.00 mm
Width: 43.00 mm
Prewired: No
Colors & materials:
Casing material: Plastic
Temperatures & operating conditions:
Ambient temperature range: -20…55 °C
Maximum temperature at tc test point: 90 °C
Max.housing temperature in case of fault: 110 °C
Permitted rel. humidity during operation: 5…85 %
Lifespan:
ECG lifetime: 60000 h 1)
Capabilities:
Dimmable: No
Overheating protection: Yes
Overload protection: Yes
Short-circuit protection: Yes
Suitable for fixtures with prot. class: II
Certificates & Standards:
Approval marks – approval: CE / CB / ENEC
Standards: Acc. To IEC/EN61347-1/Acc. to IEC 61347-2-13/Acc. to GB 19510.1/Acc. to GB 19510.14/Acc. to EN 55015/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 61000-4-2, 3, 4, 5, 6, 8, 11/Acc. to IEC 61547/Acc. to IEC 62384
Type of protection: IP20
Logistical data:
Temperature range at storage: -40…+85 °C
DR-V -60/220-240/24
Product family benefits:
Perfectly matched to 24 V LED flexible strips
Long reliable life at maximum permitted temperatures
5 years guarantee
Maintenance-free operation and minimal installation costs
Quick and simple installation
High efficiency and reliability
Product family features:
Available in 30 W, 60 W, 100 W and 200 W
Integrated cable clamp for independent installation
Lifetime: up to 60,000 h (at max. tc temperature)
Type of protection: IP20
Low ripple current < 5%
Supply voltage: 220…240 V
Operating frequency: 50/60 Hz
Operated with less than 60 V: Safety extra-low voltage (SELV)
Reversible over temperature, overload, short-circuit and open-circuit protection
Areas of application:
Cove lighting, even in tight spaces
Wallwasher effect lighting in living rooms, dining rooms, bedrooms, entrances
Offices, shopping centers, hospitals, restaurants, hotels
For indoor SELV installations
EAN: 4058075437807
TECHNICAL DATA
Nominal voltage: 220…240 V
Mains frequency: 50/60 Hz
Input voltage AC: 198…264 V 1)
Power factor λ: > 0.95 2)
ECG efficiency: 85 % 3)
Device power loss: 9.0 W 4)
Inrush current: 34 A 5)
Max. ECG no. on circuit breaker 10 A (B): 14
Max. ECG no. on circuit breaker 16 A (B): 22
Max. ECG no. on circuit breaker 25 A (B): 34
Max. ECG no. on circuit breaker 16 A (B): 22
Max. ECG no. on circuit breaker 25 A (B): 34
Surge capability (L-N): 1 kV
Nominal output voltage: 24 V 6)
Nominal output power: 60 W 7)
Galvanic isolation primary/secondary: 3.75 kV
1) Permitted voltage range2) At full load
3) At full load and 230 V
4) At maximum LED load of 60 W
5) twidth = 272 μs typical (measured at 50 % Ipeak)
6) Maximum 24 V
7) From 1 to 60 W
Dimensions & Weight:
Length: 198.00 mm
Width: 43.00 mm
Height: 30.00 mm
Mounting hole spacing, length: 141.0 mm
Cable cross-section, input side: 0,5…1,5 mm²Cable cross-section, output side: 0,5…1,5 mm²
Product weight: 192.00 g
Wire preparation length, input side: 8 mmPrewired: No
Colors & materials:
Casing material: Plastic
Temperatures & operating conditions:
Ambient temperature range: -20…55 °C
Maximum temperature at tc test point: 90 °C
Max.housing temperature in case of fault: 110 °C
Permitted rel. humidity during operation: 5…85 %
Lifespan:
ECG lifetime: 60000 h 1)
1) At maximum Tc = 80°C / 10% failure rate
Additional product data:
Encapsulated: No
Encapsulated: No
Capabilities:
Dimmable: No
Overheating protection: Yes
Overload protection: Yes
Short-circuit protection: Yes
Suitable for fixtures with prot. class: II
Max. cable length to lamp/LED module: 2.0 m
Type of connection, output side: Screw terminalCertificates & Standards:
Approval marks – approval: CE / CB / ENEC
Standards: Acc. To IEC/EN61347-1/Acc. to IEC 61347-2-13/Acc. to GB 19510.1/Acc. to GB 19510.14/Acc. to EN 55015/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 61000-4-2, 3, 4, 5, 6, 8, 11/Acc. to IEC 61547/Acc. to IEC 62384
Type of protection: IP20
Logistical data:
Temperature range at storage: -40…+85 °C
| Type of Control/Dimming | Switched |
|---|---|
| Type of LED Driver | Constant Voltage |
| Weight | 210g |
Customer Questions
Write Your Own Review
For price, stock availability and other information about this product, please contact us using the form below.
sgm_clp_1 div for segmentify