Skip to the beginning of the images gallery

Led Driver Switched only DR-V -150/220-240/24 Value 150w 24v 4058075240186

LEDVANCE

LED DRIVER VALUE | Constant voltage LED driver
DR-V -150/220-240/24

Product family benefits:
Perfectly matched to 24 V LED flexible strips
Excellent price/performance ratio
3 years guarantee
Quick and simple installation
Good efficiency and reliability

Product family features:
Available in 30 W, 60 W, 120 W and 150 W
Integrated cable clamp for independent installation
Lifetime: up to 35,000 h (at max. tc temperature)
Type of protection: IP20
Low ripple current < 5%
Supply voltage: 220…240 V
Operating frequency: 50/60 Hz
Operated with less than 60 V: Safety extra-low voltage (SELV)
Reversible over temperature, overload, short-circuit and open-circuit protection

Areas of application:
Cove lighting, even − in tight spaces
Wallwasher effect lighting in living rooms, dining rooms, bedrooms, entrances
For indoor SELV installations
Offices, shopping centers, hospitals, restaurants, hotels

EAN: 4058075240186

TECHNICAL DATA

Electrical data:

Nominal voltage: 220…240 V

Mains frequency: 50/60 Hz

Input voltage AC: 198…264 V 1)

Power factor λ: > 0.90 2)

ECG efficiency: 87 % 3)

Device power loss: 19.50 W 4)

Inrush current: 55 A 5)

Max. ECG no. on circuit breaker 10 A (B): 17
Max. ECG no. on circuit breaker 16 A (B): 28
Max. ECG no. on circuit breaker 25 A (B): 43

Surge capability (L-N): 1 kV

Nominal output voltage: 24 V 6)

Nominal output power: 150 W

Galvanic isolation primary/secondary: 3.75 kV

Nominal output current: 6250 mA 7)

U-OUT (working voltage): 24 V

1) Permitted voltage range
2) Full load at 230 V
3) At full load and 230 V
4) At maximum LED load of 150 W
5) twidth = 250 μs (measured at 50 % Ipeak)
6) Maximum 24 V
7) From 0 to 150 W
8) ±10%

Dimensions & Weight:
Length: 255.00 mm
Width: 45.00 mm

Height: 32.00 mm

Mounting hole spacing, length: 244.5 mm

Mounting hole spacing, width: 36.1 mm

Cable cross-section, input side: 0,5…1,5 mm²

Cable cross-section, output side: 0,5…1,5 mm²

Product weight: 407.00 g

Wire preparation length, input side: 5…6 mm
Wire preparation length, output side: 5…6 mm
Prewired: No

Colors & materials:
Casing material: Plastic

Temperatures & operating conditions:
Ambient temperature range: -20…40 °C
Maximum temperature at tc test point: 90 °C
Max.housing temperature in case of fault: 95 °C
Permitted rel. humidity during operation: 10…90 % 1)
1) Maximum 56 days/year at 90%

Lifespan:
ECG lifetime: 35000 h 1)

1) At maximum Tc = 90°C / 12% failure rate

Additional product data:
Encapsulated: No

Capabilities:
Dimmable: No
Dimming interface: Not dimmable
Overheating protection: No
Overload protection: Yes
Short-circuit protection: Yes
Suitable for fixtures with prot. class: I,II

Suitable for no-load mode operation: Yes

Max. cable length to lamp/LED module: 2.0 m

Type of connection, output side: Screw terminal

Certificates & Standards:
Approval marks – approval: CE
Standards:
Acc. to EN 61347-1 / Acc. to EN 61347-2-13 / Acc. to EN 55015 / Acc. to
EN 61547 / Acc. to EN 61000-3-2 / Acc. to EN 62384
Protection class: II
Type of protection: IP20

Logistical data:
Temperature range at storage: -20…+75 °C

Technical Information