Led Driver Switched only DR-V -150/220-240/24 Value 150w 24v 4058075240186
LEDVANCE
In stock
Part No
LEDDRVAL15024
LED DRIVER VALUE | Constant voltage LED driver
DR-V -150/220-240/24
Product family benefits:
Perfectly matched to 24 V LED flexible strips
Excellent price/performance ratio
3 years guarantee
Quick and simple installation
Good efficiency and reliability
Product family features:
Available in 30 W, 60 W, 120 W and 150 W
Integrated cable clamp for independent installation
Lifetime: up to 35,000 h (at max. tc temperature)
Type of protection: IP20
Low ripple current < 5%
Supply voltage: 220…240 V
Operating frequency: 50/60 Hz
Operated with less than 60 V: Safety extra-low voltage (SELV)
Reversible over temperature, overload, short-circuit and open-circuit protection
Areas of application:
Cove lighting, even − in tight spaces
Wallwasher effect lighting in living rooms, dining rooms, bedrooms, entrances
For indoor SELV installations
Offices, shopping centers, hospitals, restaurants, hotels
EAN: 4058075240186
TECHNICAL DATA
Electrical data:
2) Full load at 230 V
3) At full load and 230 V
4) At maximum LED load of 150 W
5) twidth = 250 μs (measured at 50 % Ipeak)
6) Maximum 24 V
7) From 0 to 150 W
8) ±10%
Dimensions & Weight:
Length: 255.00 mm
Width: 45.00 mm
Wire preparation length, output side: 5…6 mm
Prewired: No
Colors & materials:
Casing material: Plastic
Temperatures & operating conditions:
Ambient temperature range: -20…40 °C
Maximum temperature at tc test point: 90 °C
Max.housing temperature in case of fault: 95 °C
Permitted rel. humidity during operation: 10…90 % 1)
1) Maximum 56 days/year at 90%
Lifespan:
ECG lifetime: 35000 h 1)
Capabilities:
Dimmable: No
Dimming interface: Not dimmable
Overheating protection: No
Overload protection: Yes
Short-circuit protection: Yes
Suitable for fixtures with prot. class: I,II
Certificates & Standards:
Approval marks – approval: CE
Standards:
Acc. to EN 61347-1 / Acc. to EN 61347-2-13 / Acc. to EN 55015 / Acc. to
EN 61547 / Acc. to EN 61000-3-2 / Acc. to EN 62384
Protection class: II
Type of protection: IP20
Logistical data:
Temperature range at storage: -20…+75 °C
DR-V -150/220-240/24
Product family benefits:
Perfectly matched to 24 V LED flexible strips
Excellent price/performance ratio
3 years guarantee
Quick and simple installation
Good efficiency and reliability
Product family features:
Available in 30 W, 60 W, 120 W and 150 W
Integrated cable clamp for independent installation
Lifetime: up to 35,000 h (at max. tc temperature)
Type of protection: IP20
Low ripple current < 5%
Supply voltage: 220…240 V
Operating frequency: 50/60 Hz
Operated with less than 60 V: Safety extra-low voltage (SELV)
Reversible over temperature, overload, short-circuit and open-circuit protection
Areas of application:
Cove lighting, even − in tight spaces
Wallwasher effect lighting in living rooms, dining rooms, bedrooms, entrances
For indoor SELV installations
Offices, shopping centers, hospitals, restaurants, hotels
EAN: 4058075240186
TECHNICAL DATA
Electrical data:
Nominal voltage: 220…240 V
Mains frequency: 50/60 Hz
Input voltage AC: 198…264 V 1)
Power factor λ: > 0.90 2)
ECG efficiency: 87 % 3)
Device power loss: 19.50 W 4)
Inrush current: 55 A 5)
Max. ECG no. on circuit breaker 10 A (B): 17
Max. ECG no. on circuit breaker 16 A (B): 28
Max. ECG no. on circuit breaker 25 A (B): 43
Max. ECG no. on circuit breaker 16 A (B): 28
Max. ECG no. on circuit breaker 25 A (B): 43
Surge capability (L-N): 1 kV
Nominal output voltage: 24 V 6)
Nominal output power: 150 W
Galvanic isolation primary/secondary: 3.75 kV
Nominal output current: 6250 mA 7)
U-OUT (working voltage): 24 V
1) Permitted voltage range2) Full load at 230 V
3) At full load and 230 V
4) At maximum LED load of 150 W
5) twidth = 250 μs (measured at 50 % Ipeak)
6) Maximum 24 V
7) From 0 to 150 W
8) ±10%
Dimensions & Weight:
Length: 255.00 mm
Width: 45.00 mm
Height: 32.00 mm
Mounting hole spacing, length: 244.5 mm
Mounting hole spacing, width: 36.1 mm
Cable cross-section, input side: 0,5…1,5 mm²Cable cross-section, output side: 0,5…1,5 mm²
Product weight: 407.00 g
Wire preparation length, input side: 5…6 mmWire preparation length, output side: 5…6 mm
Prewired: No
Colors & materials:
Casing material: Plastic
Temperatures & operating conditions:
Ambient temperature range: -20…40 °C
Maximum temperature at tc test point: 90 °C
Max.housing temperature in case of fault: 95 °C
Permitted rel. humidity during operation: 10…90 % 1)
1) Maximum 56 days/year at 90%
Lifespan:
ECG lifetime: 35000 h 1)
1) At maximum Tc = 90°C / 12% failure rate
Additional product data:
Encapsulated: No
Encapsulated: No
Capabilities:
Dimmable: No
Dimming interface: Not dimmable
Overheating protection: No
Overload protection: Yes
Short-circuit protection: Yes
Suitable for fixtures with prot. class: I,II
Suitable for no-load mode operation: Yes
Max. cable length to lamp/LED module: 2.0 m
Type of connection, output side: Screw terminalCertificates & Standards:
Approval marks – approval: CE
Standards:
Acc. to EN 61347-1 / Acc. to EN 61347-2-13 / Acc. to EN 55015 / Acc. to
EN 61547 / Acc. to EN 61000-3-2 / Acc. to EN 62384
Protection class: II
Type of protection: IP20
Logistical data:
Temperature range at storage: -20…+75 °C
| Type of Control/Dimming | Switched |
|---|---|
| Type of LED Driver | Constant Voltage |
| Weight | 440g |
Customer Questions
Write Your Own Review
For price, stock availability and other information about this product, please contact us using the form below.
sgm_clp_1 div for segmentify