Led Driver Ot Fit 150 /220-240/24 Pc Mains Dimmable 4062172237642

Osram

Part No
LEDOTFIT15024PC
£58.81 £49.01
In stock
Osram Led Driver Ot Fit 150 /220-240/24 Pc Mains Dimmable for 24V LED strips EAN: 4062172237642 Optional orange cable clamp B-style LEDOTCLAMPB , for independent mounting, to be ordered separately....
Osram Led Driver Ot Fit 150 /220-240/24 Pc Mains Dimmable for 24V LED strips 
EAN: 4062172237642 

Optional orange cable clamp B-style LEDOTCLAMPB, for independent mounting, to be ordered separately. 

Product family benefits: 
IP rating: IP20 
High efficiency 
Very stable output power 
High electronical reversible short-circuit, overload, overtemperature protection 
Independent installation possible 

Areas of application: 
Suitable for luminaires of protection classes I and II 
Hospitality – decorative lighting, night light 
Restaurants – decorative lighting 
Shops – decorative lighting, shelf lighting 
Residential – cove lighting, under cabinet lighting 

Technical spec: 
Nominal input voltage: 220…240 V 
Mains frequency: 50/60 HZ Hz 
Input voltage AC: 198…264 V 
Total harmonic distortion: < 15 % 
Power factor λ: > 0.95 
Efficiency in full-load: 92 % 
Device power loss: 13 W 
Inrush current: < 60 A 
Max. ECG no. on circuit breaker 10 A (C): 3 
Max. ECG no. on circuit breaker 10 A (B): 2 
Max. ECG no. on circuit breaker 16 A (B): 4 
Max. ECG no. on circuit breaker 16 A (C): 6 
Surge capability (L/N-Ground): 2 kV 
Surge capability (L-N): 1 kV 
Nominal output voltage: 24.2 V 
Nominal output power: 60.5...151.3 W 
Maximum output power: 151.3 W 
Galvanic isolation: SELV 
Output PWM frequency: 3k Hz 

Dimensions & weight: 
Mounting hole spacing, length: 159.5 mm 
Product weight: 580.00 g 
Cable cross-section, input side: 0.75…1.5 mm² 
Cable cross-section, output side: 0.75…1.5 mm² 
Wire preparation length, input side: 7…8 mm 
Wire preparation length, output side: 7…8 mm 
Mounting hole spacing, width: 66 mm 
Length: 170.0 mm
Height: 30.0 mm 
Width: 76.0 mm 

Colors & materials: 
Casing material: Plastic 

Temperatures & operating conditions: 
Ambient temperature range: -20…+45 °C 
Maximum temperature at tc test point: 80 °C 
Max.housing temperature in case of fault: 110 °C 
Temperature range at storage: -20…80 °C 
Permitted rel. humidity during operation: 5…85 % 

Lifespan: 
ECG lifetime: 50000 h 

Capabilities: 
Dimmable: Yes 
Dimming interface: Phase Cut 
Dimming range: 3…100 % 
Dimming method: PWM 
Overheating protection: Yes 
Overload protection: Yes 
Short-circuit protection: 
Yes
No-load proof: Yes 
Suitable for fixtures with prot. class: I 
Type of connection, input side: Fixed connection (terminal) 
Type of connection, output side: Fixed connection (terminal) 
Number of channels: 1 
Control interface: Trailing edge dimmer recommended 

Programming: 
Tuner4TRONIC: No 

Certificates & standards: 
Approval marks – approval: CE / ENEC / CCC / RCM / UKCA / EAC / SELV / CB 
Standards: Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 60598-1/Acc. to EN 62384/CISPR 15/EN 55015 
Protection class: II 
Type of protection: IP20
Technical Information
Weight 580g
Customer Questions
No Questions
Did you find what you were looking for?
Write Your Own Review
You're reviewing:Led Driver Ot Fit 150 /220-240/24 Pc Mains Dimmable 4062172237642
Your Rating

Enquire about this product

For price, stock availability and other information about this product, please contact us using the form below.

sgm_clp_1 div for segmentify