wDALI-2 Bluetooth 5 wireless Bridge. Module to wirelessly connect spatially separated DALI lines 89453348

wDALI-2 Bluetooth 5 wireless Bridge

Module to wirelessly connect spatially separated DALI lines. The wireless connection is bidirectional – control is possible from both DALI lines. Additionally, DALI queries are supported.

The wireless connection is set up using the DALI Cockpit PC Software. The device connected to the DALI Cockpit can be set to Master mode and wirelessly searches for all other modules (Slaves) within range. The Slaves can then be paired with the Master via the Cockpit Software. After paring the DALI devices in the Slave-DALI-lines can be addressed and configured wirelessly via the wireless DALI bridge that has been set up.
The range of the wireless connection is up to 300m outdoors, inside buildings, depending on construction, from 10m to 20m.
The device is suitable for flush-mounted installation boxes.
Version with integrated DALI Power Supply LEDWDALI2BTBRGPS, provides 20mA for the sub-line (up to 10 DALI ballasts).

Product features:
Module for the easy connection of one or more spatially separated DALI systems
Bidirectional connection - allows control and queries of DALI devices of main and sub DALI lines bidirectionally
Configurable operating mode as master or slave
A master can be connected with multiple slaves, at maximum 10. This way multiple DALI sub-lines can be connected
Different devices can be paired (max. 10 in total): BT Bridge in slave mode as subline, wDALI-2 BT Dimmer: 1Ch, 2Ch, CWWW or wDALI-2 BT RM
Encrypted communication based on BT5 Long Range
Range of the wireless connection is up to 300m outdoors, inside buildings, depending on construction 10m to 20m are possible
Support of DALI-2 control commands
Easy configuration with the DALI Cockpit Software and DALI USB interface
This version is supplied from the main DALI line
2 sets of DALI terminals for easy connection - signal line can be looped through

Article number: 89453348 (version without power supply)
GTIN: 9010342013959

Input L, N
Input type: N/A
Marking terminals: N/A
Rated input voltage: N/A
Input voltage frequency: N/A
Max. power consumption: N/A

output: DA+, DA-
Output type: DALI control
Marking terminals: DA+, DA-
Output voltage: 9.5 - 22,5 Vdc
Guaranteed output current: N/A
Maximum output current: N/A
Typical current consumption Iin: Slave: 5mA / Master: 7mA

Environmental conditions:
Storing and transportation temperature: -20°C +75°C
Operational ambient temperature: -20°C +55°C
Rel. humidity, not condensing: 15% - 90%

General data:
Dimensions (l x w x h): 59 x 33 x 15mm
Wireless technology / policy: Bluetooth 5 Long Range
Mounting: back box installation
Maximum temperature tc: 60 °C
Protection class: SKII (when used/installed as intended)
Protection degree: IP20

Terminals:
Connection type: spring terminal connectors
Wire size: solid core: 0,5 - 1,5 mm2 (AWG20 - AWG16)
Wire size: fine wired: 0,5 - 1,5 mm2 (AWG20 - AWG16)
Wire size: using wire end ferrule: 0,25 - 1 mm2
Stripping length: 8,5 - 9,5 mm / 0,33 - 0,37 inch
Release of wire: push button

Standards:
DALI: EN 62386-101 /104 Dali+
EMV: EN 61547, EN 50015 / IEC CISPR15
Safety: EN 61347-2-11, EN 61347-1
Markings: UKCA, CE