paneles de rack 1U perforados para 12 conectores de la serie D

Part No
R1269/1UK/12
12,07 € 10,06 €
Disponible
paneles de rack 1U perforados para 12 conectores de la serie D Neutrik (XLR, Speakon, RJ45, etc.)

Mantenga sus aparatos electrónicos organizados y estructurados.

Información técnica
modelo 3d View 3D Drawing
Número de conectores 12
Material 1.2mm Acero
Tamaño(U) 1U
Peso 227g
Conectores Serie D
Acabado Negro
Preguntas de los clientes
Can 1/4", powercon, ethercon, MIDI and USB jacks be installed on this R1269/1UK/12 panel as well, or is it only compatible with XLR and speakon jacks? thanks!
The R1269/1UK/12 is designed to be used with the Neutrik D-series range of chassis connectors. If you use the Neutrik ethercon, midi and USB then this is suitable.
Are the screw holes for mounting inserts tapped or will it require nuts on the back side to hold in the inserts?
Thank you for your enquiry. The mounting insert holes are not tapped. You will require nuts on the back or you can use our product COMFD - https://www.pennelcomonline.com/en/Penn-Elcom-M3-Mounting-Frame-for-unified-chassis-MFD/m-5179.aspx Kind Regards...
do you all have a 1U rack panel punched out for 2 x SpeakON connectors...Thanks, Lupe
Thank you for your enquiry, We do not have this in our range, you could produce this through our "panel design" software, please find link below - https://www.penn-elcom.com//penn-elcom-panel-designer Regards Penn Elcom
What are the correct screws for this panel? I'm installing Canare SDI jacks and Neutrik XLR jacks.
Thank yo ufor your enquiry, We sell the fixings for the d-series connectors, We would suggest using the COMFD rear mounting frames and the HSM3C12BP-100 Kind Regards PennElcomOnline
Please, mind that only logged in users can submit questions
Escribe tu propia reseña
Only registered users can write reviews. Please Sign in or create an account
Para obtener información sobre precios, disponibilidad de existencias y cualquier otra consulta sobre este producto, póngase en contacto con nosotros usando el siguiente formulario.

sgm_clp_1 div para segmentar