Skip to the beginning of the images gallery

DALI-2 Mini Pushbutton coupler with 4 inputs 86451537

Lunatone

Be the first to review this product

Part No

LEDDALI2MCMINI

Sales: +86 (0) 769-86803388 Enquire / Order

Details

DALI-2 MC MINI coupler with 4 inputs to connect standard potential-free switches or pushbuttons and additionally an optional status LED

Each
input can be individually configured with target address, button
behaviour and DALI commands. Besides the standard functions, dimming,
switching, scene recall, etc., predefined macros such as setting the
colour temperature, dynamic scenes and sequences as well as user defined
command lists are supported. Factory setting: the application controller is activated. With the DALI Cockpit PC Software the device can be set to instance mode. Alternatively, 100kΩ potentiometers can also be connected; the input signal is converted directly into a DALI dimming level (Configuration via DALI Cockpit). The very compact device is designed to fit behind a switch in a flush-type installation box.

Product features:
Designed and made in the EU

Compact housing for flush-type installation box

Very small dimensions

Product family overview:
Compact DALI-2 control module with 4 potential-free inputs

Multi-master capable: Several modules can be installed within a DALI circuit

Each input can be configured for digital or analog input signals. As digital input it is possible to add a status LED (VF< 2,5V) in parallel

Momentary switches or 100kΩ potentiometers can be connected directly to the DALI MC Mini

Four DALI-2 pushbutton instances are available for an easy integration in building management systems

As DALI-2 Application controller, different effective ranges, button functions and DALI commands can be assigned to each input

In addition to the standard DALI commands, the application controller also supports DALI DT8 TC and RGB(W) control as well as Sequences, macros and other functions

Available button functions are among others: short button press, long button press (with repetition for dimming) and «toggle»

Suitable for push-buttons, as well as switches

Additional Alternative button function: A second function can be assigned to each input. Activated / deactivated via a scene command or switch at input 4. Thus, offering an easy solution to the partition wall problem

For potentiometer use the input signal is converted directly into a DALI light-level

Adjustable “power-up”-function

Easy configuration via Lunatone DALI USB interface and DALI-Cockpit Software Tool

Easy installation: the device can be installed in a flush-mounted installation box and is supplied via the DALI bus

DALI-2 control unit according to IEC62386-103

Product type: DALI-2 MC

Article number: 86451537

GTIN: 9010342018107

Factory default setting: App-Controller activated / Instance Event Messages deactivated

DALI interface, power supply:

Output type: DALI, DALI-2, Multimaster

Input cable colour: Orange

Cable length: 100 mm
Voltage range: 9,5V-22,5Vdc according to IEC62386
Typical current consumption DALI (16,5V): 3.8 mA
Typical current consumption DALI (22,5V): 3.9 mA
DALI addresses: none
DALI-2 addresses: 1

Input:
Input type: Potential free button/switch
Number of inputs: 4
Input cable colours: T1 - green, T2 - grey, T3 - brown, T4 - white, COM - blue
Cable length: 100 mm
Minimum length of control pulse: 40 ms
Control pulse length for long press configurable: 200-5100 ms
Max wire length pushbutton input: 5 m

Insulation data:
Impulse voltage: category II
Pollution degree: 2
Rated insulation voltage: 250V
Insulation DALI / mains: reinforced isolation
Insulation test voltage DALI / mains: 3000Vac

Environmental conditions:
Storing and transportation temperature: -20°C +75°C
Operational ambient temperature: -20°C +60°C
Rel. humidity, not condensing: 15% - 90%

General data:
Dimensions (l x w x h): 22mm x 22mm x 13mm (details below)
Mounting back box installation, installation in protection class II devices
Rated maximum temperature tc: 65°C
Expected life time: 200.000h
Protection class: SKII (when used/installed as intended)
Protection degree terminals: IP20

Standards:
DALI: IEC62386-101:2014, IEC62386-103:2014
EMV: EN 61547, EN 50015 / IEC CISPR15
Safety: EN 61347-2-11, EN 61347-1
Markings: DALI-2, CE

More Information