9.5mm High Quality Film Faced Panel with Black Diamond Phenolic Face, Black Smooth Reverse

9.5mm film-faced birch plywood with a diamond-pattern anti-slip grip face and a smooth back. The go-to board where road-case interiors, drawer bases, decks or floors need a non-slip surface that still routs and trims like standard panel. Supplied as a standard 8'× 4'sheet (2440 × 1220mm).

The diamond-patterned phenolic face grips gear, boxes and boots; the smooth reverse cleans easily and takes hardware. Built from five or more layers of cross-bonded birch veneer, with a hard phenolic film that resists scratches, abrasion, chemicals and UV. The film is the water-resistant barrier, so seal cut edges and drilled holes for continued protection in damp conditions.

• Face: 185gsm Matt Black Diamond Anti-Slip Phenolic
• Reverse: 185gsm Matt Black Smooth Phenolic
• Edges Sealed With Black Paint

Specification

• Width: 1220mm
• Length: 2440mm
• Nominal Thickness: 9.5mm
• Finish: Black
• Pattern: Diamond
• Face Grain: runs along the 2440mm edge
• Core: birch plywood, five or more layers of cross-bonded birch veneer
• Weight Per Sheet: 19kg
• Bonding: phenol-formaldehyde resin; meets EN 13986 & EN 314-3
• Formaldehyde: E1 + CARB Phase 2
• Certification: FSC Mix 96% (responsible forestry)
• Resistance: water-, chemical- and UV-resistant film surface