13mm High Quality Film Faced Birch Plywood with Black Haircell Phenolic Face, Smooth Reverse
13mm film-faced birch plywood with a fine black haircell (pinseal) phenolic face and a smooth back. A subtle textured finish that hides scuffs and handling marks on case exteriors. Supplied as a standard 8 × 4 sheet (2440 × 1220mm).
The haircell-patterned face keeps case exteriors looking clean under heavy handling; the smooth reverse cleans easily and takes hardware. Built from five or more layers of cross-bonded birch veneer, with a hard phenolic film that resists scratches, abrasion, chemicals and UV. The film is the water-resistant barrier, so seal cut edges and drilled holes for continued protection in damp conditions.
- Face: 185gsm Matt Black Haircell (Pinseal) Phenolic
- Reverse: 185gsm Matt Black Smooth Phenolic
- Edges Sealed With Black Paint
- Width: 1220mm
- Length: 2440mm
- Nominal Thickness: 13mm
- Finish: Black
- Pattern: Haircell / Pinseal
- Face Grain: runs along the 2440mm edge
- Core: birch plywood, five or more layers of cross-bonded birch veneer
- Weight Per Sheet: 26kg
- Bonding: phenol-formaldehyde resin; meets EN 13986 & EN 314-3
- Formaldehyde: E1 + CARB Phase 2
- Certification: FSC Mix 96% (responsible forestry)
- Resistance: water-, chemical- and UV-resistant film surface
| Data Sheet | Haircell Phenolic Laminated Panels - Penn Elcom USA |
|---|---|
| Backing | Yes |
| Texture | Haircell / Smooth |
| Nominal Thickness | 13mm |
| Wood | Birch Plywood |
| Weight | 26.3kg |
| Dimensions | 2.44mx1.22m |
| Laminate | Phenolic |
| Finish | Black |
Customer Questions
Write Your Own Review
For price, stock availability and other information about this product, please contact us using the form below.
For price, stock availability and other information about this product, please contact us using the form below.
sgm_clp_1 div for segmentify
