Led Oti Dali 25/220-240/700 NFC 4062172017909

OTi DALI 25/220…240/700 NFC

OPTOTRONIC Intelligent – DALI NFC | Compact constant current LED driver – Dimmable
EAN: 4062172017909

Optional orange cable clamp B-style LEDOTCLAMPB, for independent mounting to be ordered separately

Product family benefits:
Versatile DALI window driver due to flexible output characteristic
Locking and unlocking of luminaire/driver data 
Advanced luminaire/driver data (power, energy, operating hours) for analytics 
DALI-2 certified incl. Parts 251, 252, 253 
Easy and fast output current setting via NFC 
Very high efficiency High-quality dimming of 1…100 % by amplitude dimming

Versatile scope of application due to OSRAM DALI Technology:
Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13,appendix J) thanks to DC detection (0 Hz, pulsating DC), on/off switchable
Feedback of power consumption and operating hours (Fit for SMART GRID)
Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting

Areas of application:
Installation in emergency lighting systems according to IEC 61347-2-13, appendix J 
Suitable for use in luminaires with flexible current setting 
Suitable for indoor SELV installations 
Suitable for luminaires of protection classes I and II 
Suitable for downlights, spotlights and LED panels installation via Cable Clamp Kit possible (depending on version of product)

Technical data:

Nominal input voltage: 220…240 V
Mains frequency: 0/50/60 Hz
Input voltage AC: 198…264 V
Input voltage DC: 176…276 V
Total harmonic distortion: < 10 %
Power factor λ: > 0.95
Efficiency in full-load: 88 %
Device power loss: -
Networked standby power: 0.15 W
Inrush current: 15 A
Max. ECG no. on circuit breaker 10 A (B): 18
Max. ECG no. on circuit breaker 10 A (C): -
Max. ECG no. on circuit breaker 16 A (B): 28
Max. ECG no. on circuit breaker 16 A (C): -
Max. ECG no. on circuit breaker 25 A (B): -
Surge capability (L/N-Ground): 2 kV
Surge capability (L-N): 1 kV
Nominal output voltage: 15…54 V
U-OUT (working voltage): 60 V
Nominal output current: 180…700 mA
Default output current: 500 mA
Output current tolerance: ±3 %
Output ripple current (100 Hz): < 3 %
Output PSTLM: ≤1
Output SVM: ≤0.4
Nominal output power: 27 W
Maximum output power: 27 W
Galvanic isolation DALI/mains: SELV
Current set: DALI / NFC
Galvanic isolation DALI/output: SELV
Galvanic isolation primary/secondary: SELV

Dimensions & weight:
Mounting hole spacing, length: 94.0 mm
Mounting hole spacing, width: 58.0 mm
Product weight: 145.00 g
Cable cross-section, input side: 0.2…1.5 mm²
Cable cross-section, output side: 0.2…1.5 mm²
Wire preparation length, input side: 8.0…9.0 mm
Wire preparation length, output side: 8.0…9.0 mm
Width: 67.0 mm
Height: 29.5 mm
Length: 103.0 mm

Colors & materials:
Casing material: Plastic

Temperatures & operating conditions:
Ambient temperature range: -20…+50 °C
Maximum temperature at tc test point: 75 °C
Max.housing temperature in case of fault: 110 °C
Temperature range at storage: -40…+85 °C
Permitted rel. humidity during operation: 5…85 %

Lifespan:
ECG lifetime: 50000 / 100000 h

Additional product data:
Predecessor EAN:  4052899548213

Capabilities:
Dimmable: Yes
Dimming interface: DALI / Touch DIM / Touch DIM Sensor
Dimming range: 1…100 %
Dimming method: Amplitude Modulation
Overheating protection: Automatic reversible
Overload protection: Automatic reversible
Short-circuit protection: Automatic reversible
No-load proof: Yes
Intended for no-load operation: No
Max. cable length to lamp/LED module: 2.0 m
Suitable for fixtures with prot. class: I / II
Type of connection, input side: Push terminal
Type of connection, output side: Push terminal
Constant lumen function: Programmable
Number of channels: 1
Suitable for emergency lighting: Yes
DALI-2 Diagnostic Data: Yes
DALI-2 Energy Data: Yes
Programming interface: DALI, NFC

Programming:
Box programming: Yes
Tuner4TRONIC: Yes
Programming device: DALI / NFC
Tuner4TRONIC Field App: Yes

Programmable features:
TouchDIM + Sensor: Yes
DALI Settings: Yes
Emergency Mode: Yes
DALI-2 Luminaire Data: Yes
Configuration Lock: Yes
OEM Key: No
Constant Lumen: Yes
Lamp Operating Time: Yes
Soft Switch Off: Yes
Dim to Dark: Yes
Driver Guard: Yes

Certificates & standards:
Approval marks – approval: CE / EL / ENEC 10 / VDE / VDE-EMC / DALI-2 / EAC / MM
Standards: Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 62384/Acc. to EN 62386/Acc. to IEC 62386-101:Ed2/Acc. to IEC 62386-102:Ed2/Acc. to IEC 62386-207:Ed1
Protection class: II
Type of protection: IP20