Led Driver Switching only DR-V -120/220-240/24 Value 120w 24v 4058075754980

LED DRIVER VALUE | Constant voltage LED driver
DR-V -120/220-240/24

Product family benefits:
Perfectly matched to 24 V LED flexible strips
Excellent price/performance ratio
3 years guarantee
Quick and simple installation
Good efficiency and reliability

Product family features:
Available in 30 W, 60 W, 120 W and 150 W
Integrated cable clamp for independent installation
Lifetime: up to 35,000 h (at max. tc temperature)
Type of protection: IP20
Low ripple current < 5%
Supply voltage: 220…240 V
Operating frequency: 50/60 Hz
Operated with less than 60 V: Safety extra-low voltage (SELV)
Reversible over temperature, overload, short-circuit and open-circuit protection

Areas of application:
Cove lighting, even − in tight spaces
Wallwasher effect lighting in living rooms, dining rooms, bedrooms, entrances
For indoor SELV installations
Offices, shopping centers, hospitals, restaurants, hotels

EAN: 4058075754980

TECHNICAL DATA

Electrical data:
Nominal wattage: 120.00 W
Nominal output power: 120 W 1)
Nominal voltage: 220…240 V
Nominal output voltage: 24 V 2)
Input voltage range: 220…240 V
Input voltage AC: 198…264 V 3)
U-OUT (working voltage): 24 V
Type of current: DC
Nominal current: 740 mA
Nominal output current: 5000 mA 4)
Inrush current: 55 A
Output ripple current: (100 Hz) 5 %
Mains frequency: 50…60 Hz
Total harmonic distortion: < 10 % 5)
Power factor λ: > 0.90 6)
ECG efficiency: 87 % 7)
Device power loss: 17.90 W 8)
Max. ECG no. on circuit breaker 10 A (B): 4
Max. ECG no. on circuit breaker 16 A (B): 7
Max. ECG no. on circuit breaker 25 A (B): 9
Surge capability (L-N): 1 kV
Galvanic isolation: SELV
1) From 0 to 120 W
2) Maximum 24 V
3) Permitted voltage range
4) ±10%
5) At full load, 220…240 V, 50 Hz
6) Full load at 230 V
7) At full load and 230 V
8) At maximum LED load of 120 W

Dimensions & Weight:
Length: 268.00 mm
Mounting hole spacing, length: 251 mm
Width: 45.00 mm
Height: 30.50 mm
Cable cross-section, input side: 0,75…1,5 mm²
Cable cross-section, output side: 0,5…1,5 mm²
Prewired: No
Wire preparation length, input side: 7…9 mm
Wire preparation length, output side: 7…9 mm
Product weight: 390.00 g

Colors & materials:
Product color: White
Casing material: Plastic
Body material: Plastic

Temperatures & operating conditions:
Ambient temperature range: -20…45 °C
Maximum temperature at tc test point: 85 °C
Max.housing temperature in case of fault: 110 °C
Temperature range in operation: -20…+45 °C
Permitted rel. humidity during operation: 20…90 % 1)
1) Maximum 56 days/year at 90%

Lifespan:
ECG lifetime: 35000 h 1)
1) At maximum Tc = 90°C / 10% failure rate

Capabilities:
Dimmable: No
Dimming interface: Not dimmable
Overheating protection: Yes
Overload protection: Yes
Short-circuit protection: Yes
Suitable for fixtures with prot. class: I,II
Suitable for emergency lighting: No
Type of connection, output side: Screw terminal

Certificates & Standards:
Approval marks – approval: CE
Standards: Acc. to EN 61347-1 / Acc. to EN 61347-2-13 / Acc. to EN 55015 / Acc. to EN 61547 / Acc. to EN 61000-3-2 / Acc. to EN 62384
Protection class: II
Type of protection: IP20

Logistical data:
Temperature range at storage: -25…+80 °C