3/8" High Quality Film Faced Birch Plywood with Gray Textured Phenolic Face, Gray Smooth Reverse
3/8" film-faced birch plywood finished gray on both sides, with a fine textured matte phenolic face and a smooth reverse. A low-sheen, fingerprint-resistant surface for cases and fit-outs that call for a flat, non-reflective finish. Supplied as a 4 × 8 ft (1220 × 2440mm) sheet.
The textured face hides handling marks and cuts glare; the smooth reverse cleans easily and takes hardware. Built from five or more layers of cross-bonded birch veneer, with a hard phenolic film that resists scratches, abrasion, chemicals and UV. The film is the water-resistant barrier, so seal cut edges and drilled holes for continued protection in damp conditions.
The textured face hides handling marks and cuts glare; the smooth reverse cleans easily and takes hardware. Built from five or more layers of cross-bonded birch veneer, with a hard phenolic film that resists scratches, abrasion, chemicals and UV. The film is the water-resistant barrier, so seal cut edges and drilled holes for continued protection in damp conditions.
- Face: 185gsm Matte Gray Textured Phenolic
- Reverse: 185gsm Matte Gray Smooth Phenolic
- Edges Sealed With Gray Paint
- Width: 48" (1220mm)
- Length: 96" (2440mm)
- Nominal Thickness: 3/8" (0.37" / 9.5mm)
- Finish: Gray
- Pattern: Textured
- Face Grain: runs along the 96" edge
- Core: birch plywood, five or more layers of cross-bonded birch veneer
- Weight: 19kg
- Bonding: phenol-formaldehyde resin; meets EN 13986 & EN 314-3
- Formaldehyde: E1 + CARB Phase 2
- Certification: FSC Mix 96% (responsible forestry)
- Resistance: water-, chemical- and UV-resistant film surface
| Backing | Yes |
|---|---|
| Texture | Textured / Smooth |
| Nominal Thickness | 3/8" |
| Wood | Birch Plywood |
| Weight | 41.9lbs |
| Dimensions | 96 1/16"x48 1/16" |
| Laminate | Phenolic |
| Finish | Grey |
Customer Questions
Write Your Own Review
For price, stock availability and other information about this product, please contact us using the form below.
For price, stock availability and other information about this product, please contact us using the form below.
sgm_clp_1 div for segmentify