OTi DALI 50/220-240/24 1 Channel CV Power supplies with DALI Generation3 DALI drive
EAN: 4062172274340
Product family benefits: Intelligent power matching thanks to Smart power supply Slim form factor for mounting on the cove or in linear luminaires No stroboscopic effect thanks to patented high PWM frequency management (> 2 kHz) Suitable for installation in emergency lighting systems according to EN 60598-2-22 Available as single-channel or multi-channel with DT6 and DT8 in one device DALI message detection "LED Module failure" IP rating: IP20
Areas of application: Cove lighting, wall washer, corridor, handrail, luminous ceilings Suitable for use in luminaires of protection class I and II
Equipment / Accessories: Suitable for 24 V LED modules
Electrical data: Nominal input voltage: 220…240 V Mains frequency: 50/60 Hz Input voltage AC: 198…264 V Total harmonic distortion: 0.98 Efficiency in full-load: 92 % Device power loss: 4.0 W Inrush current: 41 A Max. ECG no. on circuit breaker 10 A (B): 13 Max. ECG no. on circuit breaker 10 A (C): 22 Max. ECG no. on circuit breaker 16 A (C): 36 Max. ECG no. on circuit breaker 16 A (B): 21 Max. ECG no. on circuit breaker 25 A (B): 33 Surge capability (L/N-Ground): 2 kV Surge capability (L-N): 1 kV Nominal output voltage: 24 V U-OUT (working voltage): 24.2 V Nominal output power: 50 W Maximum output power: 50 W Galvanic isolation: SELV Galvanic isolation primary/secondary: 3.75 kV Input voltage DC: 176…276 V Output PWM frequency: > 2000 Hz Output ripple Voltage (100 Hz):< 1 %
Dimensions & weight: Mounting hole spacing, length: 300.6 mm Product weight: 191.00 g Cable cross-section, input side: 0.5…2.5 mm² Cable cross-section, output side: 0.2…1.5 mm² Wire preparation length, input side: 6.0 mm Wire preparation length, output side: 5.0 mm Length: 346.0 mm Height: 22.0 mm Width: 32.0 mm
Colors & materials: Casing material: Plastic
Temperatures & operating conditions: Ambient temperature range: -20…+45 °C Maximum temperature at tc test point: 75 °C Max.housing temperature in case of fault: 110 °C Temperature range at storage: -40…+85 °C Permitted rel. humidity during operation: 5…85 %
Capabilities: Dimmable: Yes Dimming interface: DALI-2 / Corridor / Touch DIM Dimming range: 0.1…100 % Dimming method: Pulse Width Modulation Overheating protection: Automatic reversible Overload protection: Automatic reversible Short-circuit protection: Automatic reversible No-load proof: Yes Intended for no-load operation: No Suitable for fixtures with prot. class: I / II Type of connection, input side: Screw terminal Type of connection, output side: Screw terminal Number of channels: 1 Control interface: DALI-2
Programming: Tuner4TRONIC: Yes
Certificates & standards: Approval marks – approval: BIS / CCC / EAC / EL / ENEC 10 / RCM / VDE / VDE-EMC Standards: Acc. to EN 55015/Acc. to EN 60598-2-22/Acc. to EN 61000-3-2/Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 61547/Acc. to EN 62384/Acc. to EN 62386 Protection class: II Type of protection: IP20
Logistical data: Commodity code: 850440829000
Environmental information: Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh) Date of Declaration: 20-09-2022 Primary Article Identifier: 4062172274340 Declaration No. in SCIP database: In work
We're proud to have contributed to the Lanier Theological Library, a world-class theological resource housed in a converted 17th-century tithe barn at Yarnton Manor.
Working alongside the project electrician and joinery company, we assembled over 1,000 bespoke lengths of LED tape and extrusion - each cut, wired, labelled, and ready to install into the custom shelving.