Skip to the beginning of the images gallery

Led Driver Switched only DR-P 60/220-240/24 Performance 60w 24v 4099854683176

LEDVANCE

LED DRIVER PERFORMANCE | Constant voltage outdoor LED driver
DR-P 60/220-240/24

Product family benefits:
Perfectly matched to 24 V LED flexible strips
Excellent price/performance ratio
Quick and simple installation
Good efficiency and reliability

Product family features:
Available in 30 W, 60 W, 120 W, 150 W, 200 W and 250 W
Integrated cable clamp for independent installation
Lifetime: up to 50,000 h (at max. tc temperature)
Type of protection: IP20
Supply voltage: 220…240 V
Operating frequency: 50/60 Hz
Operated with less than 60 V: Safety extra-low voltage (SELV)
Reversible over temperature, overload, short-circuit and open-circuit protection

Areas of application:
Cove lighting, even in tight spaces
For indoor SELV installations
Offices, shopping centers, hospitals, restaurants, hotels

EAN: 4099854683176

TECHNICAL DATA

Electrical data:
Nominal wattage: 60.00 W
Nominal output power: 60 W 1)
Nominal voltage: 220…240 V
Nominal output voltage: 24 V 2)
Input voltage AC: 198…264 V 3)
U-OUT (working voltage): 24 V
Type of current: DC
Nominal current: 390 mA
Nominal output current: 2500 mA
Inrush current: 43.8 A
Output ripple current: (100 Hz) 5 %
Mains frequency: 50…60 Hz
Total harmonic distortion: < 8 % 4)
Power factor λ: > 0.97 5)
ECG efficiency: 89 % 6)

Device power loss: 7.4 W 7)

Max. ECG no. on circuit breaker 10 A (B): 10

Max. ECG no. on circuit breaker 16 A (B): 16
Max. ECG no. on circuit breaker 25 A (B): 23
Max. ECG no. on circuit breaker 32 A (B): 29
Max. ECG no. on circuit breaker 10 A (C): 16
Max. ECG no. on circuit breaker 16 A (C): 27
Max. ECG no. on circuit breaker 32 A (C): 49

Surge capability (L/N-Ground): 2 kV

Surge capability (L-N): 1 kV

Galvanic isolation: SELV

Power loss in stand-by mode: ≤0.5 W

1) From 0 to 60 W
2) Maximum 24 V
3) Permitted voltage range
4) At full load, 220…240 V, 50 Hz
5) Full load at 230 V
6) At full load and 230 V
7) At maximum LED load of 60 W

Dimensions & Weight:
Length: 194.00 mm
Mounting hole spacing, length: 183.0 mm
Width: 40.00 mm
Height: 31.00 mm
Cable cross-section, input side: 0.5…1.5 mm²
Cable cross-section, output side: 0.5…1.5 mm²
Prewired: No
Product weight: 215.00 g

Colors & materials:
Product color: White
Casing material: Plastic
Body material: Plastic

Temperatures & operating conditions:
Ambient temperature range: -20…80 °C
Maximum temperature at tc test point: 90 °C
Max.housing temperature in case of fault: 90 °C
Temperature range in operation: -20…+45 °C

Permitted rel. humidity during operation: 20…90 %

Lifespan:

ECG lifetime: 50000 h 1)

Number of switching cycles: 25000

1) At maximum Tc = 85°C

Additional product data:
Encapsulated: Yes

Capabilities:
Dimmable: No
Dimming interface: Not dimmable
Overheating protection: Yes
Overload protection: Yes

Short-circuit protection: Yes

No-load proof: Yes

Max. cable length to lamp/LED module: 0.8 m

Suitable for fixtures with prot. class: II
Suitable for emergency lighting: No
Type of connection, output side: Screwless terminal

Certificates & Standards:
Approval marks – approval: CE / UKCA / EAC
Standards:
Acc. to EN 61347-1 / Acc. to EN 61347-2-13 / Acc. to EN 55015 / Acc. to
EN 61547 / Acc. to EN 61000-3-2 / Acc. to EN 62384
Protection class: II
Type of protection: IP20

Logistical data:
Temperature range at storage: -20…+80 °C

Technical Information