Led Driver Non-dim Constant Current 4W ECP4-350IL

Non-dim Constant Current LED Drivers 4W

The LED module should not be connected to the driver while this is powered ("hot-plugging"). As per recommandation in the leaflet supplied with the LED driver:

"Be sure to connect the light to the power supply first before connecting power supply to outlet. Failure to connect to an outlet in this order may cause damage and will void manufacturers warranty"

ECP4 Series Features:
Constant current design
IP66 rated
Protections: Short circuit/ Overload

Input Voltage: 100 – 240VAC
Cooling by free air convection
Low cost, high reliability
Output Power: 4W
Compact and light-weight plastic case
Working Temperature: 0°C to +45°C
3 year warranty

Technical data:
Output power: max. 4W
Input Voltage: 100~240VAC
Input Frequency: 50/60Hz
Output Current: 350mA
Output Voltage: 3-12V
Max output voltage: 17Vdc (no-load)
Full Load Efficiency (Typ.): 78%
Protection: Short Circuit, Over Loading, Over Temperature
Protection Class: II
IP Rating: IP66
Output Length Cable: 200mm
Galvanic isolation: SELV
Weight: 0.045 Kg
Output Voltage Options: Single
Dimensions: 52.5 x 26.8 x 21.4 mm
Working Temperature: -40~+85°C
Safety Standards: EN61347-1, EN61347-2-13
EMC Standards: EN55015, EN61000-3-2, EN61000-3-3, EN61547