Led Icutronic Constant Corrent It Dali 15/220-240/350 CS 6977078993999

Product family benefits
Safety ensured by Inventronics (SELV)
DALI-2 certified
High flexibility due to eight different output currents
Touch DIM application: easy to control via pushbutton or sensor
Easy to use in corridors and restrooms because of three-level Corridor function
Higher quality of light thanks to low output ripple current
Small housing for flexible luminaire designs

Areas of application:
Offices
Shops
Hospitality
Panels, spotlight, downlight, and other indoor LED luminaires
Suitable for indoor SELV equivalent installations
Suitable for luminaires of protection classes I and II

Technical Data

Electrical data:
Nominal input voltage: 220…240 V
Mains frequency: 0/50/60 Hz
Input voltage AC: 198…264 V
Total harmonic distortion: < 10 %
Power factor λ: 0.57C…0.98
Efficiency in full-load: 85 %
Device power loss: 2.7 W
Networked standby power: <0.5 W
Inrush current: 10 A
Max. ECG no. on circuit breaker 10 A (B): 59
Max. ECG no. on circuit breaker 16 A (B): 95
Surge capability (L/N-Ground): 2 kV
Nominal output voltage: 9…42 V
U-OUT (working voltage): 60 V
Output current tolerance: ±5 %
Output ripple current (100 Hz): < 5 %
Output PSTLM: ≤1
Output SVM: ≤0.4
Nominal output power: 0.9...14.7 W
Maximum output power: 14.7 W
Galvanic isolation primary/secondary: SELV
Galvanic isolation DALI/mains: Basic
Galvanic isolation DALI/output: SELV

Dimensions & weight
Mounting hole spacing, length: 130.0 mm
Mounting hole spacing, width:116.0 mm
Product weight: 68.50 g
Cable cross-section, input side: 0.75…1.5 mm²
Cable cross-section, output side: 0.75…1.5 mm²
Wire preparation length, input side: 7…8 mm
Wire preparation length, output side: 7…8 mm
Width: 30.0 mm
Height: 22.2 mm

Colors & materials

Temperatures & operating conditions
Ambient temperature range: -20…+50/-20…+45 °C
Maximum temperature at tc test point: 80 °C
Max.housing temperature in case of fault: 110 °C
Temperature range at storage: -40…85 °C
Permitted rel. humidity during operation: 5…85 %

Lifespan

Additional product data
Encapsulated: No

Capabilities
Dimming interface: DALI-2 / Touch DIM / Corridor
Dimming range: 1…100 %
Dimming method: Amplitude Modulation
Overheating protection: Automatic reversible
Overload protection: Automatic reversible
Short-circuit protection: Automatic reversible
No-load proof: Yes
Intended for no-load operation: No
Type of connection, input side: Push terminal

Programming
Programming device: DALI / DIPswitch
Tuner4TRONIC: Yes
Tuner4TRONIC: Field App No
Box programming: No

Programmable features
DALI Settings: Yes
TouchDIM + Sensor: Yes
Corridor Functionality: Yes
Dim to Dark: No
Soft Switch Off: No
Tuning Factor: No
Configuration Lock: Yes
Driver Guard: No
Emergency Mode: Yes

Certificates & standards
Approval marks – approval: CE / ENEC / EL / RCM / UKCA / CCC / KC / BIS
Standards: Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to EN 55015/Acc. to IEC 61547/Acc. to IEC 61000-3-2/Acc. to IEC 62384
Type of protection: IP20

Logistical data

Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration: 18-08-2026
SCIP_STATUS: In work