9.84ft H07 Studio Series Power Lead 1/16" NAC3FXXA-W-S - NAC3FXXB-W-S
Part No
LPE15FCAB3
9.84ft H07 Studio Series Power Lead 1/16" NAC3FXXA-W-S - NAC3FXXB-W-S
Pre-assembled powerCON A-to-B link lead. Genuine Neutrik powerCON FXX connectors - the current-generation successor to NAC3FCA / NAC3FCB - terminated to H07 rubber-jacketed cable. Built for studio, stage and install where a locking, daisy-chainable AC power link is needed. Backwards-compatible with existing NAC3MPA / NAC3MPB chassis connectors as well as the new XX series receptacles.
Key Features
Neutrik NAC3FXXA-W-S - NAC3FXXB-W-S - current-generation FXX series, in-production replacement for the discontinued NAC3FCA / NAC3FCB.
Circuit Breaking Capability (CBC) when mated with Neutrik powerCON XX Series receptacles - safe make/break under load on compatible equipment.
H07 rubber-jacketed cable - Class 5 fine-stranded copper, flame-retardant, oil- and acid-resistant.
Neutrik locking bushing and strain relief sized for 0.24"–0.47" cable OD, with two-component kink protection at the entry.
Pre-keyed power-in (blue) / power-out (gray) - intermating prevented by design.
IEC EN 60320-1 / UL 60320-1 / CSA C22.2 No. 60320-1 certified connectors.
Specifications
Connector A (in): Neutrik NAC3FXXA-W-S (powerCON A, blue, power-in)
Connector B (out): Neutrik NAC3FXXB-W-S (powerCON B, gray, power-out)
Cable: Cleveland Cable
Construction: 3 × 1.5mm², Class 5 fine-stranded copper
Conductor size (AWG equivalent): approx. 16 AWG
Jacket: Black, rubber, IEC 60332-1-2 flame retardant
Cable OD: 0.40"
Cable current rating: 16A
Connector current rating: 16A (Neutrik FXX max)
Operating voltage: 100–250V AC
Phase: Single phase
Cable temperature range: −13°F to +140°F
Minimum bend radius: 0.79"
| Cable Length | 3m / 118 1/8" |
|---|---|
| Weight | 500g |
Customer Questions
Write Your Own Review
For price, stock availability and other information about this product, please contact us using the form below.
For price, stock availability and other information about this product, please contact us using the form below.
sgm_clp_1 div for segmentify