The Penn Elcom COB RGBW Series LED strip comes with homogeneous, soft linear lighting performance. Thick copper ensures consistent voltage and brightness across the full 16.4 ft (5m) reel. High density with 840 LED chips per meter. Can be controlled via PWM, for example Bluetooth/Casambi, DALI, DMX or RF.
Application:
Indirect decorative lighting for displays, shelving, cabinets, corridors, stairs, coves, ceiling coffers, restaurants, bars, media units, cinemas etc.
Accessories:
LEDPL-RGBW-12MM-CONN – Penn PCB connector 5.9" (150mm)
LEDPL-RGBW-12MM-JOIN – Penn PCB joiner 5.9" (150mm)
CA5F22V2 - 5 core flat cable for low voltage LED applications (0.34 mm²)
Control options:
DALI: Osram/Inventronics 50W 4ch driver LEDOTIDALI50G3CH4, 80W 4ch driver LEDOTIDALI80G3CH4, 160W 2ch driver LEDOTIDALI160G3CH2, 360W* 4ch dimmer LEDITD0P4CNFC
DMX: Osram/Inventronics 4ch dimmer LEDOTDMXRGBW or 5ch dimmer LEDOTDMXDIM5CH or fossLED 4ch dimmer LEDFLDC4YDMX + Wall controller LEDWP4RGBWN
Casambi: Osram/Inventronics 50W 4ch driver LEDOTWI504CHCA, 80W 4ch driver LEDOTWI804CHCA, 160W 2ch driver LEDOTWI1602CHCA, 288W* 5ch dimmer LEDITD0P4CNFC
RF: fossLED 4ch dimmer LEDFLDC4Y + Remote
LEDFLCT4WY*with 24V LED strips
Important Notes:
Must be installed with a heat sink for cooling, for example aluminum extrusion designed for LED tape.
3M 300LSE adhesive tape is on the back of the LED tape.
One end of the LED tape has a 19.7" (500mm) factory soldered tail with brown/green/red/blue/white cable.
The LED strip has a minimum bending radius of 0.8" (20mm).
Technical Specification
Part number: LEDPL-COBRGBW940-18W
Dimension (LxWxH): 16.4 ft (5000mm) x 0.5" (12mm) x 0.06" (1.5mm)
IP rating: IP20
Light source: COB (Chip on board) & CSP (Chip scale package)
Total lumen output (± 10%): 970 lm/m
Red lumen output (± 10%): 135 lm/m
Green lumen output (± 10%): 405 lm/m
Blue lumen output (± 10%): 68 lm/m
4000K lumen output (± 10%): 369 lm/m
LED strip cut-points: every 1.3" (33mm) (28 LED chips)
LED chips per meter: 840 LED's/m
PCB type: white FPC, OSP
Operating ambient temperature: 68 to 113 °F (20 to 45 °C), storage 68 to 140 °F (20 to 60 °C)
Energy efficiency class of regulation (EU) 2019/2020: G for white in IP20
Warranty: 5 years
Certification: CE, UKCA
Power consumption (± 10%): 18W/m (4.5W per color)
Input voltage: 24VDC
LED current: 6mA/chip
LED CCT: RGBW 4000K
CRI≥90
Beam angle: 150°
Dimming method: PWM
Maximum running length: 16.4 ft (5m)
