Hi, I needed some help in seeing if this box is suitable for our use. I run an 8 core cable from 4 different amps carrying their own range of hz. at the end of the cable i wanted to use this box then to send each individual frequency to the desired box eg- 1=sub 2=bass 3=midrange 4=high I was a bit confused to if this just took one signla and split it 4 times.

hank you for the question. This R2SP82 box will do what you require. The box has 4 x NL4 each wired on pins +1-1, these are numbered 1 2 3 & 4 all coming from all pins on the NL8. 1 is on pins +1-1 2 is on pins +2-2 3 is on pins +3-3 4 is on pins +4-4 You will require an 8core lead with NL8 one end and 4 tails the other using each pair on the tails +&- with the required mating connector for your amps.