Led Driver Switching only DR-SUP -200/220-240/24 Superior 200w 24v 4058075437845

LED DRIVER SUPERIOR | Constant voltage LED driver
DR-V -200/220-240/24

Product family benefits:
Perfectly matched to 24 V LED flexible strips
Long reliable life at maximum permitted temperatures
5 years guarantee
Maintenance-free operation and minimal installation costs
Quick and simple installation
High efficiency and reliability

Product family features:
Available in 30 W, 60 W, 100 W and 200 W
Integrated cable clamp for independent installation
Lifetime: up to 60,000 h (at max. tc temperature)
Type of protection: IP20
Low ripple current < 5%
Supply voltage: 220…240 V
Operating frequency: 50/60 Hz
Operated with less than 60 V: Safety extra-low voltage (SELV)
Reversible over temperature, overload, short-circuit and open-circuit protection

Areas of application:
Cove lighting, even in tight spaces
Wallwasher effect lighting in living rooms, dining rooms, bedrooms, entrances
Offices, shopping centers, hospitals, restaurants, hotels
For indoor SELV installations

EAN: 4058075437845

Electrical data:
Nominal wattage: 200.00 W
Nominal output power: 200 W 1)
Nominal voltage: 220…240 V
Nominal output voltage: 24 V 2)
Input voltage AC: 198…264 V 3)
U-OUT (working voltage): 25 V
Type of current: DC
Nominal current: 1000 mA
Nominal output current: 8340 mA
Inrush current: 130 A
Output ripple current: (100 Hz) 1.5 %
Mains frequency: 50…60 Hz
Total harmonic distortion: < 10 % 4)
Power factor λ: > 0.97 4)
ECG efficiency: 92 % 5)
Device power loss: 16 W 6)
Max. ECG no. on circuit breaker 10 A (B): 6
Max. ECG no. on circuit breaker 16 A (B): 9
Max. ECG no. on circuit breaker 25 A (B): 14
Surge capability (L-N): 1 kV
Galvanic isolation: SELV
1) From 1 to 200 W
2) Maximum 24 V
3) Permitted voltage range
4) At full load
5) At full load and 230 V
6) At maximum LED load of 200 W

Dimensions & Weight:
Length: 328.00 mm
Mounting hole spacing, length: 270.0 mm
Width: 43.00 mm
Height: 30.00 mm
Cable cross-section, input side: 0,5…1,5 mm²
Cable cross-section, output side: 0,5…1,5 mm²
Prewired: No
Wire preparation length, input side: 8 mm
Wire preparation length, output side: 8 mm
Product weight: 345.00 g

Colors & materials:
Product color: White
Casing material: Plastic
Body material: Plastic

Temperatures & operating conditions:
Ambient temperature range: -20…50 °C
Maximum temperature at tc test point: 80 °C
Max.housing temperature in case of fault: 110 °C
Temperature range in operation: -20…+50 °C
Permitted rel. humidity during operation: 5…85 %

Lifespan:
ECG lifetime: 60000 h 1)

Capabilities:
Dimmable: No
Dimming interface: Not dimmable
Overheating protection: Yes
Overload protection: Yes
Short-circuit protection: Yes
Suitable for fixtures with prot. class: II
Suitable for emergency lighting: No
Type of connection, output side: Fixed connection (terminal)

Certificates & Standards:
Approval marks – approval: CE / CB / ENEC
Standards:
Acc. To IEC/EN61347-1 / Acc. to IEC 61347-2-13 / Acc. to GB 19510.1 /
Acc. to GB 19510.14 / Acc. to EN 55015 / Acc. to IEC 61000-3-2 / Acc. to
IEC 61000-3-3 / Acc. to IEC 61000-4-2, 3, 4, 5, 6, 8, 11 / Acc. to IEC
61547 / Acc. to IEC 62384
Protection class: II
Type of protection: IP20

Logistical data:
Temperature range at storage: -40…+85 °C