Outdoor IP66/IP67 Led Dimmable Driver Oti Dali-2 210/220-240/24 1-4 Channel DT6/DT8 P 6937186115133

CV Power supplies with DALI-2
The Inventronics constant voltage power supplies with DALI, enable you to maximize
any designs potential and enjoy flicker-free light due to a high PWM
frequency, dimmable to between 0.1 and 100 % with TouchDIM. Use from 1
to 4 channels and benefit from DALI message detection of LED module
failure.
The slender form of these drivers makes them ideal for use
when you need to install LED lighting in tight spaces or linear
luminaires, for example in coves, corridors and handrails, or for wall
washing. They are suitable for 24 V LED modules and for use with
luminaires of protection classes I and II.
Product family benefits:
Long lasting and high reliability
From 1 to 4 channels to arbitrarily distribute the power
Suitable for installation under sunlight
IP66/IP67 Salt mist resistant and DC functionality
AstroDim functionality for automatic dimming and turn on/off

Areas of Application:
Public squares and architecture lighting
In building facades, luminous signage
Suitable for indoor and outdoor SELV installations
Suitable for use in luminaires of protection class I
Electrical data:
Nominal output power: 0-210 W *, **
Min load per channel: 30 W
Device power loss (Full load, 230 Vac, 50 Hz): 18.4 W
Mains frequency: 50/60 Hz
Power loss in stand-by mode: <0.5 W
Nominal line voltage: 220-240 V
Nominal output voltage (DC): 24.7 V
Input voltage AC: 198-264 V
Input voltage DC (with external fuse): 176-276 V
Nominal current (Full load, 230 Vac, 50 Hz): 1.05 A
Total Harmonic Distortion (THD), (Full load, 230 Vac, 50 Hz,): <5 %
Power factor (Full load, 230 Vac, 50 Hz,): 0.95 - 0.99
ECG Efficiency (Typical, Full load, 230 Vac, 50 Hz, see graphs): 93 %
Protection: class I
Suitable for fixtures with prot:. Class I
Inrush current (Full Load, 240 Vac, Cold Start): 3.7 A
Max. ECG no. on circuit breaker 10 A (B): 7
Max. ECG no. on circuit breaker 16 A (B): 11
Max. ECG no. on circuit breaker 25 A (B): 17
Max. ECG no. on circuit breaker 10 A (C): 7
Max. ECG no. on circuit breaker 16 A (C): 11
Output ripple Voltage (100 Hz): < 5%
Galvanic isolation: SELV
Galvanic isolation: DALI/mains Basic
Galvanic isolation: DALI/output Double

Dimensions & weight:
Length: 330.0 mm
Width: 80.0 mm
Height: 47.0 mm
Mounting hole spacing, length: 320.0 mm
Cable cross-section, input side: 1.0 mm²
Cable cross-section, output side: 1.5 mm²
Wire preparation length, input side: 90 mm
Wire preparation length, output side: 90 mm
Product weight: 1603.00 g

Temperatures & operating conditions:
Ambient temperature range: -30 +55 C
Storage temperature range: -40 +85 C

Capabilities:
Dimmable: Yes
Dimming interface: DALI-2 / AstroDIM
Dimming range: 0.1…100 %
Dimming method: Pulse Width Modulation
Suitable for fixtures with prot.: class I
Suitable for emergency lighting: Yes
EL EOFi – default value: 0.15
Type of connection, input side: Wires
Type of connection, output side: Wires
Number of channels: 4
Overheating protection: Automatic reversible
Overload protection: Automatic reversible
Short-circuit protection: Automatic reversible
Intended for no-load operation: No
No-load proof: Yes

Lifespan:
Expected ECG lifetime (Ta = 60C, Tc = 75C and 10% failure rate, always ON): 30000 h
Expected ECG lifetime (Ta = 60C, Tc = 75C and 10% failure rate, 14 h ON and 10 h stand-by per day): 50000 h
Warranty (10% cumulated failure): 5 years

Certificates & standards:
Type of protection: IP66/IP67
Approval marks – approval: ENEC 10 / RCM / VDE / UKCA / EL / MM
Standards: EN 61347-2-13 / EN 61547 / EN 55015 / EN 61000-3-2 / EN 61000-3-3 / EN 61347-1 / EN 62493

*Lamp failure detection: minimum load per channel that doesn't trigger open circuit detection is 30W
**Power factor, harmonics and EMI guaranteed between 80–210 W
***See "OTi Dali cable lengths parameters" file in download section for detailed information