Esta página web utiliza cookies. Al continuar utilizando esta página web, acepta nuestro uso de cookies. Para obtener más información, visite nuestra Cookies Policy
  • World IconEspañol
  • powerCON

    (1 a 5 De 5)

    powerCON 20 Amp

    Image of powerCON 20 Amp
    El conector powerCON es un equipo de bloqueo de 3 conductores AC con contactos pre-acoplados de poder, neutro y tierra. Reemplaza los conectores IEC siempre que se necesite una solución resistente en combinación con una pestaña de bloqueo para garant...

    powerCON 20 Amp

    Image of powerCON 20 Amp
    Image of powerCON 20 Amp Image of powerCON 20 Amp
    El conector powerCON es un equipo de bloqueo de 3 conductores AC con contactos pre-acoplados de poder, neutro y tierra. Reemplaza los conectores IEC siempre que se necesite una solución resistente en combinación con una pestaña de bloqueo para garantizar una conexión de alimentación segura. Los conectores de powerCON no están diseñados para ser desconectados “en caliente” y no tiene capacidad de interrupción. en otras palabras, no deben de ser conectados/desconectados en vivo o bajo tensión.

    Especificaciones técnicas:

    -Mantiene 20 A / 250 V de un conector IEC
    -3 Contactos poder, neutral y tierra
    -Conector power-in de entrada (azul) y power-out de salida (gris) con guías diferentes para evitar confusiones.
    -Pestaña de bloqueo de giro rápido y fácil
    -Extremadamente robusto y confiable
    -Diseño ergonómico
    -Pestaña de bloqueo fácil de usar
    -Prensacable Neutrik patentado
    -Componentes reconocidos UL, cUL
    -Certificado VDE
    -Aprobado por SEV
    -Holograma de autenticidad Neutrik estampado
    ReferenciaTerminaciónTipoConectorPines
    CONAC3MPA1Terminales de lengüeta planaA-power- in de entradaConector chasis3
    CONAC3MPB1Terminales de lengüeta planaB-power- out de salidaConector chasis3
    CONAC3FCATerminales de tornilloA-power- in de entradaConector aéreo3
    CONAC3FCBTerminales de tornilloB-power- out de salidaConector aéreo3

    powerCON 32 Amp

    Image of powerCON 32 Amp
    The 32 Amp powerCON is an extremely robust and reliable locking single phase AC appliance cable connector for high current capacity (32 A rated). It is conceived as a non-standardized 3 pole connection system without breaking capacity to serve the ne...

    powerCON 32 Amp

    Image of powerCON 32 Amp
    The 32 Amp powerCON is an extremely robust and reliable locking single phase AC appliance cable connector for high current capacity (32 A rated). It is conceived as a non-standardized 3 pole connection system without breaking capacity to serve the needs of high power distribution systems and supplies for professional audio and lighting equipment and installations. The connectors comprise of contacts for phase, neutral and protective earth (ground) conductors rated for currents up to 32 A and for voltages up to 250V.

    Features & Benefits
    -250 V ac, 32 Amp single-phase (for ambient temperatures up to 35°C)
    -Premating contact for protective earth
    -Fast and easy locking system to prevent unintentional disengagement
    -Cable O.D. Range: 8 - 20 mm
    -Wiring with screw-type terminals for wires 2.5 to 6.0 mm² (AWG 14 - 10)
    -Excellent cable handling and protection
    -Extremely robust and reliable
    -VDE, UL, cUL and JET approved
    ReferenciaConnectorTerminationPole
    CONAC3FCHCCable connectorScrew terminals3
    CONAC3MPHCChassis connector - Power-inScrew terminals3

    powerCON 32 Amp (5 Pole 2P + 3 PE)

    Image of powerCON 32 Amp (5 Pole 2P + 3 PE)
    Single phase powerCON® with 3 protective earth conductors
    32 Amp / NAC3-2 Series - AC Installation Coupler
    (5 Pole 2P + 3 PE)

    The AC installation coupler was conceived to serve the needs of distribution systems for professio...

    powerCON 32 Amp (5 Pole 2P + 3 PE)

    Image of powerCON 32 Amp (5 Pole 2P + 3 PE)
    Single phase powerCON® with 3 protective earth conductors
    32 Amp / NAC3-2 Series - AC Installation Coupler
    (5 Pole 2P + 3 PE)

    The AC installation coupler was conceived to serve the needs of distribution systems for professional IT equipment and desk power supplies for the office environment. The system is designed according to the British Standard BS 7671
    section 607 only and is therefore limited to corresponding applications. Operation is only guaranteed for related applications and has the ASTA marks licence number: 845.
    Note: The PowerCon® is a connector without breaking capacity, i.e. the PowerCon® should not be connected or disconnected under load or live!
    ReferenciaPoleConnectorTermination
    CONAC32FC5Cable connectorScrew terminals
    CONAC32MP5Chassis connector - Power-inScrew terminals

    powerCON TRUE1 Chassis TOP Series

    Image of powerCON TRUE1 Chassis TOP Series
    The powerCON TRUE1 TOP is a locking 16 A true mains connector for outdoor applications. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection. ...

    powerCON TRUE1 Chassis TOP Series

    Image of powerCON TRUE1 Chassis TOP Series
    Image of powerCON TRUE1 Chassis TOP Series Image of powerCON TRUE1 Chassis TOP Series
    The powerCON TRUE1 TOP is a locking 16 A true mains connector for outdoor applications. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection.

    The powerCON TRUE1 TOP is a connector with breaking capacity (CBC), i.e. it can be connected or disconnected under load or live.

    Features & Benefits
    - Heavy duty sealed power connector for harsh and demanding environment
    - Outdoor protection according to IP65 and UL50E enclosure type 4 (in mated condition or in combination with the rubber sealing cover SCNAC-MPX)
    - Uses high impact UV-resistant materials
    - True mains connector with breaking capacity (CBC)
    - Lockable 16 A single phase connector (USA: 20 A)
    - Easy and reliable twist lock system
    - Extremely robust and reliable Unique Neutrik cable retention
    - ENEC certified according to IEC 60320
    - UL498 certified
    ReferenciaAcabadoTypeTerminals
    CONAC3MPXTOPBlackInlet1/4" flat tab terminals
    CONAC3FPXTOPBlackOutlet1/4" flat tab terminals
    CONAC3PXTOPBlackInlet-Outlet Combination1/4" flat tab terminals
    CONAC3FPXSTTOPBlackOutletScrew terminals

    Conector TRUE1 Serie Top

    Image of Conector TRUE1 Serie Top
    El powerCON TRUE1 es un conector de red de 16A diseñado para aplicaciones en exteriores. Reemplaza los conectores IEC siempre que se necesite una solución resistente en combinación con una pestaña de bloqueo para garantizar una conexión de alimentaci...

    Conector TRUE1 Serie Top

    Image of Conector TRUE1 Serie Top
    El powerCON TRUE1 es un conector de red de 16A diseñado para aplicaciones en exteriores. Reemplaza los conectores IEC siempre que se necesite una solución resistente en combinación con una pestaña de bloqueo para garantizar una conexión de alimentación segura.

    El conector TRUE1 es un conector con capacidad de interrupción (CBC), es decir, se puede conectar/desconectar en vivo o bajo tensión.

    Especificaciones:
    -Capacidad de interrupción (CBC), es decir, se puede conectar/desconectar en vivo o bajo tensión.
    -Protección exterior IP65 y sello UL50E tipo 4 (conectado)
    -Utiliza materiales UV- de alta resistencia a los impactos
    -Conector de poder con capacidad de interrupción (CBC)
    -Conector monofásico de 16 A bloqueable (USA: 20 A)
    -Resistente al polvo y al agua (conectado) certificaciónIP65
    -Pestaña de bloqueo de giro rápido y fácil
    -Extremadamente robusto y confiable
    -Prensacable Neutrik patentado
    -Certificación ENEC según IEC 60320
    -Componentes reconocidos UL, cUL
    ReferenciaDescripción
    CONAC3FXWTOPConector macho de bloqueo con terminales de tornillo
    CONAC3MXWTOPConector hembra de bloqueo con terminales de tornillo
    Penn Elcom Logo