English
| 1 Gang Galvanised Steel Knock Out Box with Brass Earth Terminals
25mm / 1" Deep Version: 20mm / 13/16" knockouts, 4 on the back, 2 on each side 47mm / 1.85" Deep Version: ... |
| 1 Gang Galvanised Steel Knock Out Box with Brass Earth Terminals
25mm / 1" Deep Version: 20mm / 13/16" knockouts, 4 on the back, 2 on each side 47mm / 1.85" Deep Version: 20mm / 13/16" knockouts, 4 on the back, 2 on three sides 25mm / 1" Knockout on the bottom Material: 1mm / 20 gauge Steel
|
| Part No. | Finish | Description |
| HBSGS | Galvanised Steel | 25mm / 1" Deep 1 Gang Galvanised Steel Box |
| HBDGS | Galvanised Steel | 47mm / 1.85" Deep 1 Gang Galvanised Steel Box |
| 2 Gang Galvanised Steel Knock Out Box with Brass Earth Terminals
25mm / 1" Deep Version: 20mm / 13/16" knockouts, 4 on the back, 2 on each side, 4 on top and bottom 47mm / 1.85" Dee... |
| 2 Gang Galvanised Steel Knock Out Box with Brass Earth Terminals
25mm / 1" Deep Version: 20mm / 13/16" knockouts, 4 on the back, 2 on each side, 4 on top and bottom 47mm / 1.85" Deep Version: 20mm / 13/16" knockouts, 4 on the back, 1 on each side, 2 on top and bottom 25mm / 1" Knockouts, 1 on each side, 2 on top and bottom Material: 1mm / 20 gauge Steel
|
| Part No. | Finish | Description |
| HBSGD | Galvanised Steel | 25mm / 1" Deep 2 Gang Galvanised Steel Box |
| HBDGD | Galvanised Steel | 47mm / 1.85" Deep 2 Gang Galvanised Steel Box |
|
| 1 Gang Pattress Box with Brass Earth Terminals
Use with 1 Gang Front Panel Ensure that the mains supply is isolated before commencing installation and refer to the circuit diagram supplied with the relevant product. Bare earth cables must always be covered with appropriate sleeving and wired to the earth terminal. All white moulded accessories are manufactured using Urea Formaldehyde, which has similar inherent properties to antimicrobial additives that inhibit the growth of infectious diseases. All products independently tested achieved a 99.9% kill rate across all four types of the strains of bacteria – MRSA, E-Coli, Salmonella, and Klebsiella Pneumoniae. Material: Urea Formaldehyde
|
| Part No. | Finish | Description |
| HBSWS | Polar White | 25mm / 1" Deep 1 Gang Pattress Box |
| HBSWD | Polar White | 47mm / 1.85" Deep 1 Gang Pattress Box |
|
| 2 Gang Pattress Box with Brass Earth Terminals
Use with 2 Gang Front Panel Ensure that the mains supply is isolated before commencing installation and refer to the circuit diagram supplied with the relevant product. Bare earth cables must always be covered with appropriate sleeving and wired to the earth terminal. All white moulded accessories are manufactured using Urea Formaldehyde, which has similar inherent properties to antimicrobial additives that inhibit the growth of infectious diseases. All products independently tested achieved a 99.9% kill rate across all four types of the strains of bacteria – MRSA, E-Coli, Salmonella, and Klebsiella Pneumoniae. Material: Urea Formaldehyde
|
| Part No. | Finish | Description |
| HBDWS | Polar White | 25mm / 1" Deep 2 Gang Pattress Box |
| HBDWD | Polar White | 47mm / 1.85" Deep 2 Gang Pattress Box |
| Plates to install multi-pin connectors into walls. |
| Plates to install multi-pin connectors into walls.
|
| Part No. | Description | Central Hole Ø |
| R2355-13 | Multi-Pin Wall Plate 13 PIN | 31mm / 1.22" |
| R2355-25 | Multi-Pin Wall Plate 25 PIN | 36.5mm / 1.44" |
| R2355-37 | Multi-Pin Wall Plate 37 PIN | 42.55mm / 1.68" |
| R2355-54 | Multi-Pin Wall Plate 54 PIN | 48.95mm / 1.93" |
| R2355-85 | Multi-Pin Wall Plate 85 PIN | 60.15mm / 2.37" |
| Front Panel for 1 Gang Pattress Boxes
Available Plain or Punched for Neutrik D-Series Connectors (XLR, SpeakON, RJ45). Includes M3 fixing screws. |
| Front Panel for 1 Gang Pattress Boxes
Available Plain or Punched for Neutrik D-Series Connectors (XLR, SpeakON, RJ45). Includes M3 fixing screws. Material: 1.5mm / 16 gauge Steel
|
| Part No. | Finish | Description | Connector | Weight |
| 81511-15 | Black | Plain | Blank | 80g/0.18lb |
| 81511-20 | Black | Plain | 1 x Neutrik D-Series Connector | 80g/0.18lb |
| 81511-RC 81511-RCS | Black Silver | Rounded Corners | 1 x Neutrik D-Series Connector | 80g/0.18lb |
| 82511-20 | Black | Plain | 2 x Neutrik D-Series Connectors | 80g/0.18lb |
| 82511-RC 82511-RCS | Black Silver | Rounded Corners | 2 x Neutrik D-Series Connectors | 80g/0.18lb |
| 82511-4-20 | Black | Plain | 4 x Neutrik D-Series Connectors | |
| 82511-4RC 82511-4RCS | Black Silver | Rounded Corners | 4 x Neutrik D-Series Connectors | 80g/0.18lb |
| Front Panel for 2 Gang Pattress Boxes
Punched for Neutrik D-Series Connectors (XLR, SpeakON, RJ45) or Neutrik A/B-Series Connectors (XLR, RJ45). Includes M3 fixing screws. |
| Front Panel for 2 Gang Pattress Boxes
Punched for Neutrik D-Series Connectors (XLR, SpeakON, RJ45) or Neutrik A/B-Series Connectors (XLR, RJ45). Includes M3 fixing screws. Material: 1.5mm / 16 gauge Steel
|
| Part No. | Finish | Description | Connector | Weight |
| 83511-20 | Black | Plain | 2 x Neutrik D-Series Connectors | 0.15kg/0.33lb |
| 83511-RC 83511-RCS | Black Silver | Rounded Corners | 2 x Neutrik D-Series Connectors | 0.15kg/0.33lb |
| 86511-RC 86511-RCS | Black Silver | Rounded Corners | 3 x Neutrik D-Series Connectors | 0.15kg/0.33lb |
| 84511-20 | Black | Plain | 4 x Neutrik D-Series Connectors | 0.15kg/0.33lb |
| 84511-RC 84511-RCS | Black Silver | Rounded Corners | 4 x Neutrik D-Series Connectors | 0.15kg/0.33lb |
| 84511-8RC 84511-8RCS | Black Silver | Rounded Corners | 8 x Neutrik D-Series Connectors | 0.15kg/0.33lb |
| 84511-9D-RC 84511-9D-RCS | Black Silver | Rounded Corners | 2 x Neutrik D-Series and 2 x D-Sub 9 | 0.15kg/0.33lb |
| 84511-15D-RC 84511-15D-RCS | Black Silver | Rounded Corners | 2 x Neutrik D-Series and 2 x D-Sub 15 | 0.15kg/0.33lb |
| 84546-20 | Black | Plain | 4 x Neutrik A/B-Series Connectors (XLR, RJ45) | 0.15kg/0.33lb |
