Inline Adapters

BNC socket - RCA / phono socket, white coded

Features & Benefits
-The D shape adapters are problem solvers for various intermating problems for professional and semi-professional applications
-Rugged aluminium extrusion housing for best reliability
-Colour coding on all RCA types

Miniature transformer balancing adapter, 3 pole XLR male - RCA / phono, red coded

Miniature transformer balancing adapters

Low cost solution for unbalanced/balanced line conversion and passive DI applications, where no earth or gain switching is required


Audio transformer 1:1
Impedance ratio: 200:200
Source/load impedance in Ohm: 200/2k, (600/10k)
Max. Input level (@ 50 Hz, 1% THD): -3 dBu

Features & Benefits
-The D shape adapters are problem solvers for various intermating problems for professional and semi-professional applications
-Rugged aluminium extrusion housing for best reliability
-Colour coding on all RCA types

XLR female-male feedthrough adapter for panel mount

XLR male-female feedthrough adapter for panel mount

Miniature transformer balancing adapter, 3 pole XLR female - RCA / phono socket, black coded

Miniature transformer balancing adapters

Low cost solution for unbalanced/balanced line conversion and passive DI applications, where no earth or gain switching is required


Audio transformer 1:1
Impedance ratio: 200:200
Source/load impedance in Ohm: 200/2k, (600/10k)
Max. Input level (@ 50 Hz, 1% THD): -3 dBu

Features & Benefits
-The D shape adapters are problem solvers for various intermating problems for professional and semi-professional applications
-Rugged aluminium extrusion housing for best reliability
-Colour coding on all RCA types

speakON NL4MP - mono locking 1/4" jack (Tip, Sleeve contact)

Features & Benefits
-The D shape adapters are problem solvers for various intermating problems for professional and semi-professional applications
-Rugged aluminium extrusion housing for best reliability
-Branded with unique hologram - guarantees genuine and authentic Neutrik product

powerCON NAC3MPA-1 (power in) - powerCON NAC3MPB-1 (power out), coupler for linking cables powerCON 20 A

The powerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection.


Attention: The powerCON is a connector without breaking capacity, i.e. the powerCON should not be connected or disconnected under load or live!

Lockable 4 pole speakON coupler

Links two NL2/4F*s together for cable extension. Changes gender to male when permanently locked on the cable.

Features permanent secure connection on a speakON cable connector using 2nd lock. Can be permanently attached to NL2/4F*.

8 pole speakON feedthrough coupler for cable extensions

EtherCON RJ45 feedthrough coupler for cable extensions

Features & Benefits
-Accommodates NE8MC* or any standard RJ45 plug
-Approved latch lock system

PCB adapters fitted with 5 pin female XLR D-size chassis connector with IDC terminal.
For use where cables have been installed & wall plates or patch bays need fixing at high speed & in a cold (no soldering) environment.
The IDC terminals do not require a punch down tool and will accept 0.5 - 0.64 mm wire with a maximum OD of 1.8mm

PCB adapters fitted with 5 pin male XLR D-size chassis connector with IDC terminal.

For use where cables have been installed & wall plates or patch bays need fixing at high speed & in a cold (no soldering) environment.
The IDC terminals do not require a punch down tool and will accept 0.5 - 0.64 mm wire with a maximum OD of 1.8mm

5 pole XLR receptacle to RJ45 Adapter

5 pole XLR receptacle in Nickel D-Series Chassis.
M3 Threaded panel mount with PCB connection Horizontal PCB mounting to RJ45 Female