This website uses cookies. By continuing to use this website you agree to our use of cookies. For more information visit our Politique relative aux Cookies
  • World IconFrançais
  • Home: Nouveaux produits

    RJD2203-0050 Amphe-Dante Entrée analogique : 2 canaux Nouveaux!

    Image of RJD2203-0050
    Amphenol Amphe-Dante Entrée analogique : 2 canaux
    Entrée RJ45 vers sortie XLR

    Amphe-Dante sont des adaptateurs audio Dante ™ audio vers analogique, disponibles pour les applications d'entrée, de sortie, AES3 e...

    RJD2203-0050 Amphe-Dante Entrée analogique : 2 canaux Nouveaux!

    Image of RJD2203-0050
    Image of RJD2203-0050 Image of RJD2203-0050
    Amphenol Amphe-Dante Entrée analogique : 2 canaux
    Entrée RJ45 vers sortie XLR

    Amphe-Dante sont des adaptateurs audio Dante ™ audio vers analogique, disponibles pour les applications d'entrée, de sortie, AES3 et USB. Doté de connecteurs XLR et RJ45 de première qualité de la série Amphenol AX, dans un boîtier robuste moulé.

    Les produits Amphe-Dante permettent de connecter facilement un équipement analogique à un réseau Dante. Ils peuvent recevoir et transmettre des canaux audio à partir d'un réseau Dante. Ils permettent également d'obtenir un son de qualité studio avec un faible latence via des connecteurs XLR vers et depuis un équipement audio analogique.

    Special Order Outside of South America

    RéférenceDescriptionPoids
    CORJD22030050Amphe-Dante Analogue Input: 2 channel Nouveaux! 0.19kg

    R7400-F Welded Rack Tower with Back Door Nouveaux!

    Image of R7400-F
    The new R7400-F Series with Rear Full Door is an economical 560mm wide freestanding Welded rack enclosure, with M6 Threaded Rail.

    Available Depths...

    R7400-F Welded Rack Tower with Back Door Nouveaux!

    Image of R7400-F
    Image of R7400-F Image of R7400-F
    The new R7400-F Series with Rear Full Door is an economical 560mm wide freestanding Welded rack enclosure, with M6 Threaded Rail.

    Available Depths: 510mm, 640mm and 710mm
    Available Heights: From 18U to 44U

    Features
    - Robust Welded assembly
    - Adjustable Threaded Rack Rails (Rear 2U less than front)
    - Includes tapped gang fixing points
    - Front and side vents for air circulation
    - Includes castor with integrated adjuster foot
    - Includes 50 x M6 High Point Screws with Plastic Washer
    - Includes Rear Full Door with removable cable access
    - Optional Front Door, Polycarbonate, Perforated Steel or Plain steel door


    Un-welded Flat Pack version available

    560mm x 510mm

    RéférenceFinitionU SizeDepthHeight
    R7451-F-18UKBlack18U510mm910mm
    R7451-F-21UKBlack21U510mm1045mm
    R7451-F-27UKBlack27U510mm1310mm
    R7451-F-35UKBlack35U510mm1665mm
    R7451-F-40UKBlack40U510mm1890mm
    R7451-F-44UKBlack44U510mm2065mm

    RéférenceFinitionU SizeDepthHeight
    R7464-F-18UKBlack18U640mm910mm
    R7464-F-21UKBlack21U640mm1045mm
    R7464-F-27UKBlack27U640mm1310mm
    R7464-F-35UKBlack35U640mm1665mm
    R7464-F-40UKBlack40U640mm1890mm
    R7464-F-44UKBlack44U640mm2065mm

    RéférenceFinitionU SizeDepthHeight
    R7471-F-18UKBlack18U710mm910mm
    R7471-F-21UKBlack21U710mm1045mm
    R7471-F-27UKBlack27U710mm1310mm
    R7471-F-35UKBlack35U710mm1665mm
    R7471-F-40UKBlack40U710mm1890mm
    R7471-F-44UKBlack44U710mm2065mm

    R7500-F Welded Rack Tower with Back Door Nouveaux!

    Image of R7500-F
    The new R7500-F Series with Rear Full Door is an economical 22" / 560mm wide freestanding Welded rack enclosure, with 10-32 Threaded Rail.

    Ava...

    R7500-F Welded Rack Tower with Back Door Nouveaux!

    Image of R7500-F
    Image of R7500-F Image of R7500-F
    The new R7500-F Series with Rear Full Door is an economical 22" / 560mm wide freestanding Welded rack enclosure, with 10-32 Threaded Rail.

    Available Depths: 20" / 510mm, 25" / 640mm and 28" / 710mm
    Available Heights: From 18U to 44U

    Features
    - Robust Welded assembly
    - Adjustable Threaded Rack Rails (Rear 2U less than front)
    - Includes tapped gang fixing points
    - Front and side vents for air circulation
    - Includes castor with integrated adjuster foot
    - Includes 50 x 10/32" High Point Screws with Plastic Washer
    - Includes Rear Full Door with removable cable access
    - Optional Front Door, Polycarbonate, Perforated Steel or Plain steel door


    Un-welded Flat Pack version available

    22" x 20" / 560mm x 510mm

    RéférenceFinitionSize (U)DepthHeight
    R7551-F-18UKBlack18U20" / 510mm36" / 910mm
    R7551-F-21UKBlack21U20" / 510mm41" / 1045mm
    R7551-F-27UKBlack27U20" / 510mm52" / 1310mm
    R7551-F-35UKBlack35U20" / 510mm66" / 1665mm
    R7551-F-40UKBlack40U20" / 510mm74" / 1890mm
    R7551-F-44UKBlack44U20" / 510mm81" / 2065mm

    RéférenceFinitionSize (U)DepthHeight
    R7564-F-18UKBlack18U25" / 640mm36" / 910mm
    R7564-F-21UKBlack21U25" / 640mm41" / 1045mm
    R7564-F-27UKBlack27U25" / 640mm52" / 1310mm
    R7564-F-35UKBlack35U25" / 640mm66" / 1665mm
    R7564-F-40UKBlack40U25" / 640mm74" / 1890mm
    R7564-F-44UKBlack44U25" / 640mm81" / 2065mm

    RéférenceFinitionSize (U)DepthHeight
    R7571-F-18UKBlack18U28" / 710mm36" / 910mm
    R7571-F-21UKBlack21U28" / 710mm41" / 1045mm
    R7571-F-27UKBlack27U28" / 710mm52" / 1310mm
    R7571-F-35UKBlack35U28" / 710mm66" / 1665mm
    R7571-F-40UKBlack40U28" / 710mm74" / 1890mm
    R7571-F-44UKBlack44U28" / 710mm81" / 2065mm

    R1291LOK Nouveaux!

    Image of R1291LOK
    Small Slam Latch with Key Lock

    R1291LOK Nouveaux!

    Image of R1291LOK
    Image of R1291LOK Image of R1291LOK Image of R1291LOK Image of R1291LOK
    Small Slam Latch with Key Lock
    RéférenceDescription
    R1291LOKSmall Slam Latch with Key Lock

    R7400 / R7500 Back Doors Nouveaux!

    Image of R7400 / R7500 Back Doors
    Full and Split Back Doors for R7400 and ...

    R7400 / R7500 Back Doors Nouveaux!

    Image of R7400 / R7500 Back Doors
    Full and Split Back Doors for R7400 and R7500 Rack Enclosures
    RéférenceFinitionU SizeDescription
    R7400-FBD-18UKBlack18UFull Back Door
    R7400-FBD-21UKBlack21UFull Back Door
    R7400-FBD-27UKBlack27UFull Back Door
    R7400-FBD-35UKBlack35UFull Back Door
    R7400-FBD-40UKBlack40UFull Back Door
    R7400-FBD-44UKBlack4UFull Back Door
    R7400-SBD-18UKBlack18USplit Back Door
    R7400-SBD-21UKBlack21USplit Back Door
    R7400-SBD-27UKBlack27USplit Back Door
    R7400-SBD-35UKBlack35USplit Back Door
    R7400-SBD-40UKBlack40USplit Back Door
    R7400-SBD-44UKBlack44USplit Back Door

    R7400 / R7500 Front Doors Nouveaux!

    Image of R7400 / R7500 Front Doors
    Front Doors for R7400, R7...

    R7400 / R7500 Front Doors Nouveaux!

    Image of R7400 / R7500 Front Doors
    Front Doors for R7400, R7500, R7400-F and R7500-F Rack Enclosures

    Available in Polycarbonate or Perforated Steel or Plain Steel

    Glass Front Door

    RéférenceU SizeDescription
    R7400-GFD-18UK18UPolycarbonate Front Door
    R7400-GFD-21UK21UPolycarbonate Front Door
    R7400-GFD-27UK27UPolycarbonate Front Door
    R7400-GFD-35UK35UPolycarbonate Front Door
    R7400-GFD-40UK40UPolycarbonate Front Door
    R7400-GFD-44UK44UPolycarbonate Front Door

    RéférenceU SizeDescription
    R7400-VFD-18UK18UPerforated Steel Front Door
    R7400-VFD-21UK21UPerforated Steel Front Door
    R7400-VFD-27UK27UPerforated Steel Front Door
    R7400-VFD-35UK35UPerforated Steel Front Door
    R7400-VFD-40UK40UPerforated Steel Front Door
    R7400-VFD-44UK44UPerforated Steel Front Door

    RéférenceU SizeDescription
    R7400-PFD-18UK18UPlain Steel Front Door
    R7400-PFD-21UK21UPlain Steel Front Door
    R7400-PFD-27UK27UPlain Steel Front Door
    R7400-PFD-35UK35UPlain Steel Front Door
    R7400-PFD-40UK40UPlain Steel Front Door
    R7400-PFD-44UK44UPlain Steel Front Door

    R7400 Welded, Metric Threaded Rack Tower Nouveaux!

    Image of R7400
    The new R7400 Series is an economical 560mm wide freestanding Welded rack enclosure, with M6 Threaded Rail.

    Available Depths: 510mm, 640mm and 710mm
    Av...

    R7400 Welded, Metric Threaded Rack Tower Nouveaux!

    Image of R7400
    Image of R7400 Image of R7400 Image of R7400
    The new R7400 Series is an economical 560mm wide freestanding Welded rack enclosure, with M6 Threaded Rail.

    Available Depths: 510mm, 640mm and 710mm
    Available Heights: From 18U to 44U

    Features
    - Robust Welded assembly
    - Adjustable Threaded Rack Rails (Rear 2U less than front)
    - Optional Front Door, Polycarbonate, Vented or Plain steel door
    - Optional rear full door, or split door with removable cable access
    - Includes tapped gang fixing points
    - Front and side vents for air circulation
    - Rear cable access knock-outs
    - Includes levelling castors

    Un-welded Flat Pack version available
    Matériel: Steel

    560mm x 510mm / 22" x 20"

    RéférenceFinitionSize (U)DepthHeight
    R7451-18UKBlack18U510mm910mm
    R7451-21UKBlack21U510mm1045mm
    R7451-27UKBlack27U510mm1310mm
    R7451-35UKBlack35U510mm1665mm
    R7451-40UKBlack40U510mm1890mm
    R7451-44UKBlack44U510mm2065mm

    RéférenceFinitionSize (U)DepthHeight
    R7464-18UKBlack18U640mm910mm
    R7464-21UKBlack21U640mm1045mm
    R7464-27UKBlack27U640mm1310mm
    R7464-35UKBlack35U640mm1665mm
    R7464-40UKBlack40U640mm1890mm
    R7464-44UKBlack44U640mm2065mm

    RéférenceFinitionSize (U)DepthHeight
    R7471-18UKBlack18U710mm910mm
    R7471-21UKBlack21U710mm1045mm
    R7471-27UKBlack27U710mm1310mm
    R7471-35UKBlack35U710mm1665mm
    R7471-40UKBlack40U710mm1890mm
    R7471-44UKBlack44U710mm2065mm

    RJD1112-0050 Amphe-Dante Sortie Analogique: 1 canal Nouveaux!

    Image of RJD1112-0050
    Amphenol Amphe-Dante Sortie analogique : 1 canal
    Entrée RJ45 vers sortie XLR

    Amphe-Dante sont des adaptateurs audio Dante™ audio vers analogique, disponibles pour les applications d'entrée, de sortie, AES3 et ...

    RJD1112-0050 Amphe-Dante Sortie Analogique: 1 canal Nouveaux!

    Image of RJD1112-0050
    Image of RJD1112-0050 Image of RJD1112-0050
    Amphenol Amphe-Dante Sortie analogique : 1 canal
    Entrée RJ45 vers sortie XLR

    Amphe-Dante sont des adaptateurs audio Dante™ audio vers analogique, disponibles pour les applications d'entrée, de sortie, AES3 et USB. Doté de connecteurs XLR et RJ45 de première qualité de la série Amphenol AX, dans un boîtier robuste moulé.

    Les produits Amphe-Dante permettent de connecter facilement un équipement analogique à un réseau Dante. Ils peuvent recevoir et transmettre des canaux audio d'un réseau Dante et fournir un son de qualité studio avec un faible latence via des connecteurs XLR vers et depuis un équipement audio analogique.

    Special Order Outside of South America

    RéférenceDescriptionPoids
    CORJD11120050 Shopping CartAmphe-Dante Analogue Output: 1 channel Nouveaux! 0.14kg

    RJD1212-0050 - Amphe-Dante Sortie analogique : 2 canaux Nouveaux!

    Image of RJD1212-0050
    Amphenol Amphe-Dante Sortie analogique : 2 canaux
    Entrée RJ45 vers sortie XLR

    Amphe-Dante sont des adaptateurs audio Dante ™ audio vers analogique, disponibles pour les applications d'entrée, de sortie, AES3 e...

    RJD1212-0050 - Amphe-Dante Sortie analogique : 2 canaux Nouveaux!

    Image of RJD1212-0050
    Image of RJD1212-0050 Image of RJD1212-0050
    Amphenol Amphe-Dante Sortie analogique : 2 canaux
    Entrée RJ45 vers sortie XLR

    Amphe-Dante sont des adaptateurs audio Dante ™ audio vers analogique, disponibles pour les applications d'entrée, de sortie, AES3 et USB. Doté de connecteurs XLR et RJ45 de première qualité de la série Amphenol AX, dans un boîtier robuste moulé.

    Les produits Amphe-Dante permettent de connecter facilement un équipement analogique à un réseau Dante. Ils peuvent recevoir et transmettre des canaux audio à partir d'un réseau Dante. Ils permettent également d'obtenir un son de qualité studio avec un faible latence via des connecteurs XLR vers et depuis un équipement audio analogique.

    Special Order Outside of South America

    RéférenceDescriptionPoids
    CORJD12120050 Shopping CartAmphe-Dante Analogue Output: 2 channel Nouveaux! 0.19kg

    RJD2103-0050 - Amphe-Dante Entrée analogique : 1 canal Nouveaux!

    Image of RJD2103-0050
    Amphenol Amphe-Dante Entrée analogique : 1 canal
    Entrée RJ45 vers sortie XLR

    Amphe-Dante sont des adaptateurs audio Dante™ audio vers analogique, disponibles pour les applications d'entrée, de sortie, AES3 et ...

    RJD2103-0050 - Amphe-Dante Entrée analogique : 1 canal Nouveaux!

    Image of RJD2103-0050
    Image of RJD2103-0050	Image of RJD2103-0050
    Amphenol Amphe-Dante Entrée analogique : 1 canal
    Entrée RJ45 vers sortie XLR

    Amphe-Dante sont des adaptateurs audio Dante™ audio vers analogique, disponibles pour les applications d'entrée, de sortie, AES3 et USB. Doté de connecteurs XLR et RJ45 de première qualité de la série Amphenol AX, dans un boîtier robuste moulé.

    Les produits Amphe-Dante permettent de connecter facilement un équipement analogique à un réseau Dante. Ils peuvent recevoir et transmettre des canaux audio à partir d'un réseau Dante. Ils permettent également d'obtenir un son de qualité studio avec un faible latence via des connecteurs XLR vers et depuis un équipement audio analogique.

    Special Order Outside of South America

    RéférenceDescriptionPoids
    CORJD21030050 Shopping CartAmphe-Dante Analogue Input: 1 channel Nouveaux! 0.14kg

    RJD32A3-0050 Amphe-Dante Entrée/Sortie AES3 : 2 canaux Nouveaux!

    Image of RJD32A3-0050
    Amphenol Amphe-Dante Entrée/Sortie AES3 : 2 canaux
    XLR I/O à RJ45 I/O

    Amphe-Dante sont des adaptateurs audio Dante™ audio vers analogique, disponibles pour les applications d'entrée, de sortie, AES3 et USB. Do...

    RJD32A3-0050 Amphe-Dante Entrée/Sortie AES3 : 2 canaux Nouveaux!

    Image of RJD32A3-0050
    Image of RJD32A3-0050 Image of RJD32A3-0050
    Amphenol Amphe-Dante Entrée/Sortie AES3 : 2 canaux
    XLR I/O à RJ45 I/O

    Amphe-Dante sont des adaptateurs audio Dante™ audio vers analogique, disponibles pour les applications d'entrée, de sortie, AES3 et USB. Doté de connecteurs XLR et RJ45 de première qualité de la série Amphenol AX, dans un boîtier robuste moulé.

    Les produits Amphe-Dante permettent de connecter facilement un équipement analogique à un réseau Dante. Ils peuvent recevoir et transmettre des canaux audio à partir d'un réseau Dante. Ils permettent également d'obtenir un son de qualité studio avec un faible latence via des connecteurs XLR vers et depuis un équipement audio analogique.

    Special Order Outside of South America

    RéférenceDescriptionPoids
    CORJD32A30050 Shopping CartAmphe-Dante AES3 Input / Output - 2 channel Nouveaux! 0.19kg

    RJD32U1-0050 Amphe-Dante USB Entrée/Sortie : 2 canaux Nouveaux!

    Image of RJD32U1-0050
    Amphenol Amphe-Dante Entrée analogique : 2 canaux
    USB I/O vers RJ45 I/O

    Amphe-Dante sont des adaptateurs audio Dante™ audio vers analogique, disponibles pour les applications d'entrée, de sortie, AES3 et USB. ...

    RJD32U1-0050 Amphe-Dante USB Entrée/Sortie : 2 canaux Nouveaux!

    Image of RJD32U1-0050
    Image of RJD32U1-0050 Image of RJD32U1-0050
    Amphenol Amphe-Dante Entrée analogique : 2 canaux
    USB I/O vers RJ45 I/O

    Amphe-Dante sont des adaptateurs audio Dante™ audio vers analogique, disponibles pour les applications d'entrée, de sortie, AES3 et USB. Doté de connecteurs XLR et RJ45 de première qualité de la série Amphenol AX, dans un robuste boîtier moulé.

    Les produits Amphe-Dante permettent de connecter facilement un équipement analogique à un réseau Dante. Ils peuvent recevoir et transmettre des canaux audio d'un réseau Dante et fournir un son de qualité studio avec un faible latence via des connecteurs XLR vers et depuis un équipement audio analogique.

    Special Order Outside of South America

    RéférenceDescriptionPoids
    CORJD32U10050 Shopping CartAmphe-Dante USB Input / Output - 2 channel Nouveaux! 0.11kg

    speakON Chassis Connectors speakON Connecteurs de châssis

    Image of speakON Chassis Connectors
    Le tableau de connecteurs SpeakON sont les connecteurs de châssis standard pour les interconnexions haut-parleur/amplificateur.
    Ils disposent d'un système de verrouillage en métal unique, permettant un contact une fois entièrement verrouil...

    speakON Chassis Connectors speakON Connecteurs de châssis

    Image of speakON Chassis Connectors
    Le tableau de connecteurs SpeakON sont les connecteurs de châssis standard pour les interconnexions haut-parleur/amplificateur.
    Ils disposent d'un système de verrouillage en métal unique, permettant un contact une fois entièrement verrouillé.
    Les réceptacles Speakon sont robustes, polyvalents et faciles à raccorder avec une languette plate (Faston) ou des bornes à vis, un montage sur carte ou une soudure.
    Ils sont disponibles en configuration à 2,4 et 8 pôles utilisant une découpe de panneau de taille D ou de taille G.
    Les connecteurs du châssis sont étanches à l’air pour les applications audio (fuite 30 cm3/s à une pression différentielle de 10 kPa), sauf indication contraire.

    Série D

    RéférenceFinitionCaractéristiquesPôleChâssisEncastrementFixation des panneauxAmpèrePoids
    CONL2MPXX Shopping CartBlackSpeakON Chassis Nouveaux! 2D-size flange3/16" flat tabsCountersunk thruholes
    CONL4MDH Shopping CartGrisSpeakON Châssis4Bride taille DMontage horizontal sur circuit impriméFraisée à travers les trous
    CONL4MPST Shopping CartNoirSpeakON Châssis4Bride taille DBorne à visFraisée à travers les trous
    CONL4MPUC Shopping CartNoirSpeakON Châssis4Bride taille D3/16 languettes platesFraisée à travers les trous
    CONL4MPXX Shopping CartBlackSpeakON Chassis Nouveaux! 4D-size flange3/16" flat tabsCountersunk thruholes

    Série G

    RéférenceFinitionCaractéristiquesPôleChâssisEncastrementFixation des panneauxAmpèrePoids
    CONL4MPR Shopping CartNoirSpeakON Châssis4Bride ronde taille G3/16 languettes platesFraisée à travers les trous20201kg
    CONL8MPRBAG Shopping Cart
    CONL8MPR Shopping Cart
    Chrome noir
    Nickel métal
    SpeakON Châssis8Bride ronde taille G3/16 languettes platesFraisée à travers les trous10601

    powerCON 20 Amp

    Image of powerCON 20 Amp
    Le powerCON est un powerCONCA verrouillable pour équipements à 3 conducteurs avec des contacts pour les contacts de ligne, de neutre et de mise à la terre. Il remplace les coupleurs d'appareils lorsqu'une solution très robuste associée à un d...

    powerCON 20 Amp

    Image of powerCON 20 Amp
    Image of powerCON 20 Amp Image of powerCON 20 Amp
    Le powerCON est un powerCONCA verrouillable pour équipements à 3 conducteurs avec des contacts pour les contacts de ligne, de neutre et de mise à la terre. Il remplace les coupleurs d'appareils lorsqu'une solution très robuste associée à un dispositif de verrouillage est nécessaire pour garantir une connexion électrique sûre.
    Attention: le powerCON est un connecteur sans capacité de coupure, c’est-à-dire que le powerCON ne doit pas être connecté ou déconnecté sous charge ou sous tension!
    Caractéristiques et avantages
    - Coupleur d'appareil verrouillable 20Amp/250V ca
    - Contacts pour ligne, neutre et mise à la terre
    - Versions d'alimentation (bleue) et de sortie électrique (grise) avec différentes manipulations pour éviter toute possibilité d'intermittence
    - Système de verrouillage rapide et facile
    - Extrêmement robuste et fiable
    Design ergonomique
    - Verrou convivial pour une manipulation facile
    - Décharge de traction unique de type mandrin Neutrik
    UL, composants reconnus cUL
    - Certifié VDE
    - SEV approuvé
    - Un hologramme unique garantit des produits authentiques et authentiques de Neutrik
    RéférenceFinitionEncastrementPower TypeConnectorPole
    CONAC3MPXXA Shopping CartBlueFlat tab terminals Nouveaux! A-type for power-inChassis connector3
    CONAC3MPXXB Shopping CartGreyFlat tab terminals Nouveaux! B-type for power-outChassis connector3
    CONAC3FCA1 Shopping CartBlueScrew terminals Nouveaux! A-type for power-inCable connector3
    CONAC3FCB1 Shopping CartGreyScrew terminals Nouveaux! B-type for power-outCable connector3

    W0985-125-V6 - W0990-125-V6 Nouveaux!

    Image of W0985-125-V6 - W0990-125-V6
    125mm / 5" Castor with Rubber Blue Wheel
    Wheel Width: 27mm / 1"

    Works with Castor Plate ...

    W0985-125-V6 - W0990-125-V6 Nouveaux!

    Image of W0985-125-V6 - W0990-125-V6
    Image of W0985-125-V6 - W0990-125-V6 Image of W0985-125-V6 - W0990-125-V6 Image of W0985-125-V6 - W0990-125-V6
    125mm / 5" Castor with Rubber Blue Wheel
    Wheel Width: 27mm / 1"

    Works with Castor Plate W0094 and universal wheel plate W8980.

    Load Capacity: 200kg / 440lb
    Matériel: Steel/Rubber
    RéférenceFinitionDescriptionPoids
    W0990-125-V6 Shopping CartZincSwivel Castor1.5kg
    W0985-125-V6 Shopping CartZincBraked Swivel Castor1.24kg

    NAC3MPXXA-WOT Nouveaux!

    Image of NAC3MPXXA-WOT
    PowerCON Mains Input 3 Pin 20A Chassis

    This connector is fully compliant to the device standard IEC 62368-1, due to its component certification according to IEC 60320-1.

    Appliance inlet connector, 3/16" flat tab terminal...

    NAC3MPXXA-WOT Nouveaux!

    Image of NAC3MPXXA-WOT
    PowerCON Mains Input 3 Pin 20A Chassis

    This connector is fully compliant to the device standard IEC 62368-1, due to its component certification according to IEC 60320-1.

    Appliance inlet connector, 3/16" flat tab terminals, blue, without insulation divider.

    The powerCON XX is a locking mains connector. It replaces appliance couplers wherever a very reliable solution in combination with a locking device is needed in order to guarantee a safe power connection.

    The powerCON XX is a connector with breaking capacity (CBC), i.e. it can be connected or disconnected under load or live.

    Features & Benefits
    - Lockable single phase connector
    - Certified according to IEC 60320-1 & UL 60320-1
    - 3 contacts for line, neutral and premating safety ground
    - Certified according to UL-1977 & CAN/CSA-C22.2 No. 182.3
    - Fast and easy twist lock latching system Power-in (blue) and power-out (grey) versions with different keying to avoid the possibility of intermating
    - Extremely robust and reliable
    - IEC 62368-1 compliant
    - UL94 V-0 materials

    RéférenceFinitionDescriptionConnectorTerminationPolePoids
    CONAC3MPXXAWOT Shopping CartBlueChassis connector - Power-inFlat Tab TerminalsFlat Tab Terminals340g

    AIR-TRUSS Nouveaux!

    Image of AIR-TRUSS
    Truss braces used to strengthen larger builds with angled 90° walls.

    Ideal as support against structural movement due to collision by the public.

    AIR-TRUSS Nouveaux!

    Image of AIR-TRUSS
    Image of AIR-TRUSS Image of AIR-TRUSS
    Truss braces used to strengthen larger builds with angled 90° walls.

    Ideal as support against structural movement due to collision by the public.
    Matériel: Aluminium
    RéférenceDescriptionLength
    AIR-TRUSS-33TTruss Braces Nouveaux! 851mm / 33.5"
    AIR-TRUSS-64TTruss Braces Nouveaux! 1626mm / 64"
    AIR-TRUSS-108TTruss Braces Nouveaux! 2743mm / 108"

    R2292 Touring Grade Heavy Duty Rack Drawers Nouveaux!

    Image of R2292
    Touring Grade Heavy Duty Rack Drawer with Slam Lock and Key Lock and integrated Front Pull Handle.
    Reinforced Rack Mounting Ears.
    Knock-Outs for Cable Access at the Rear.

    Rear Support Brackets ...

    R2292 Touring Grade Heavy Duty Rack Drawers Nouveaux!

    Image of R2292
    Image of R2292 Image of R2292
    Touring Grade Heavy Duty Rack Drawer with Slam Lock and Key Lock and integrated Front Pull Handle.
    Reinforced Rack Mounting Ears.
    Knock-Outs for Cable Access at the Rear.

    Rear Support Brackets R2292-RSB-KIT Included.

    Replacement Slam Latch available R1292-SLAM
    Matériel: Steel

    285mm / 10" Deep

    RéférenceFinitionSize (U)Internal Dimensions (W x D x H)
    R2292-10-2UKBlack2U409mm x 275mm x 74mm
    R2292-10-3UKBlack3U409mm x 275mm x 119mm
    R2292-10-4UKBlack4U409mm x 275mm x 163mm
    R2292-10-5UKBlack5U409mm x 275mm x 208mm
    R2292-10-6UKBlack6U409mm x 275mm x 252mm

    RéférenceFinitionSize (U)Internal Dimensions (W x D x H)
    R2292-2UKBlack2U409mm x 375mm x 74mm
    R2292-3UKBlack3U409mm x 375mm x 119mm
    R2292-4UKBlack4U409mm x 375mm x 163mm
    R2292-5UKBlack5U409mm x 375mm x 208mm
    R2292-6UKBlack6U409mm x 375mm x 252mm
    R2292-7UKBlack7U409mm x 375mm x 297mm
    R2292-8UKBlack8U409mm x 375mm x 341mm

    RéférenceFinitionSize (U)Internal Dimensions (W x D x H)
    R2292-18-2UKBlack2U409mm x 475mm x 74mm
    R2292-18-3UKBlack3U409mm x 475mm x 119mm
    R2292-18-4UKBlack4U409mm x 475mm x 163mm
    R2292-18-5UKBlack5U409mm x 475mm x 208mm
    R2292-18-6UKBlack6U409mm x 475mm x 252mm
    R2292-18-7UKBlack7U409mm x 475mm x 297mm
    R2292-18-8UKBlack8U409mm x 475mm x 341mm

    R2293 Tiroirs gamme touring "Heavy Duty"

    Image of R2293
    Tiroirs de la gamme touring "Heavy Duty" avec fermoir slam et serrure à clé et poignée avant intégrée.
    Acces pour les câble à l'arrière.

    Largeur interne: 409mm
    Profondeur interne: 362mm

    Support arri...

    R2293 Tiroirs gamme touring "Heavy Duty"

    Image of R2293
    Image of R2293 Image of R2293 Image of R2293
    Tiroirs de la gamme touring "Heavy Duty" avec fermoir slam et serrure à clé et poignée avant intégrée.
    Acces pour les câble à l'arrière.

    Largeur interne: 409mm
    Profondeur interne: 362mm

    Support arrière en option R2292-RSB-KIT disponibles.

    Fermoir de remplacement disponible [3232-SLAM-LOCK
    Matériel: Steel

    285mm / 10" Deep

    RéférenceFinitionTaille (U)CMURecommended Load CapacityPoids
    R2293-10-2UKBlack2U Nouveaux! 409mm x 275mm x 74mm22kg
    R2293-10-3UKBlack3U Nouveaux! 409mm x 275mm x 119mm26kg
    R2293-10-4UKBlack5U Nouveaux! 409mm x 275mm x 208mm36kg
    R2293-10-5UKBlack4U Nouveaux! 409mm x 275mm x 163mm35kg
    R2293-10-6UKBlack6U Nouveaux! 409mm x 275mm x 252mm38kg

    RéférenceFinitionSize (U)Internal Dimensions (W x D x H)Recommended Load CapacityPoids
    R2293/2UK Shopping CartNoir2U22kg22kg5.92kg
    R2293/3UK Shopping CartNoir3U26kg26kg6.99kg
    R2293/4UK Shopping CartNoir4U35kg35kg8.05kg
    R2293/5UK Shopping CartNoir5U36kg36kg9.13kg
    R2293/6UK Shopping CartNoir6U38kg38kg10.19kg
    R2293/7UK Shopping CartNoir7U38kg38kg11.22kg
    R2293/8UK Shopping CartNoir8U38kg38kg12.34kg

    RéférenceFinitionSize (U)Internal Dimensions (W x D x H)Recommended Load CapacityPoids
    R2293-18-2UKBlack2U Nouveaux! 409mm x 475mm x 74mm22kg
    R2293-18-3UKBlack3U Nouveaux! 409mm x 475mm x 119mm26kg
    R2293-18-4UKBlack4U Nouveaux! 409mm x 475mm x 163mm35kg
    R2293-18-5UKBlack5U Nouveaux! 409mm x 475mm x 208mm36kg
    R2293-18-6UKBlack6U Nouveaux! 409mm x 475mm x 252mm38kg
    R2293-18-7UKBlack7U Nouveaux! 409mm x 475mm x 297mm38kg
    R2293-18-8UKBlack8U Nouveaux! 409mm x 475mm x 341mm38kg

    H7148-CUP - Lid Hang Nouveaux!

    Image of H7148-CUP
    This two-piece dish kit is a clever solution for outfitting cases with convenient and unobtrusive hooks to hang a removable lid on when not on the case. This solves the problem of needing to stack many lids in a separate lo...

    H7148-CUP - Lid Hang Nouveaux!

    Image of H7148-CUP
    Image of H7148-CUP Image of H7148-CUP Image of H7148-CUP Image of H7148-CUP Image of H7148-CUP Image of H7148-CUP Image of H7148-CUP Image of H7148-CUP Image of H7148-CUP
    This two-piece dish kit is a clever solution for outfitting cases with convenient and unobtrusive hooks to hang a removable lid on when not on the case. This solves the problem of needing to stack many lids in a separate location as well as eliminating the possibility of mixing lids with cases.

    The H7148-CUP-M and H7148-CUP-F may also be used to couple cases together in a train formation. The hook and hang system lets you train many cases together to roll as one when transporting them across locations.

    How to use:
    The lid-fitted H7148-CUP-M is a swing-out handle dish that has a near-flush profile when not in use. The lid can be removed by pulling the handle out, lifting the lid off and then hanging it on the panel-fitted H7148-CUP-F hook dish.

    Smaller cases may use just one centrally-fitted kit while larger cases can utilise two kits for a double hook.



    Matériel: Steel
    RéférenceFinitionDescriptionPoids
    H7148-CUP-F Shopping CartPennBrite™Female Lid Hang0.19kg
    H7148-CUP-M Shopping CartPennBrite™Male Lid Hang0.27kg

    D053010CMZ - Cable Feedthrough Dish Nouveaux!

    Image of D053010CMZ
    Rubber Cable Feedthrough Dish

    Use the plain dish in a case panel or the offset dish over extrusion to create a convenient cable feedthrough aperture.

    You can pass cabling that is stored inside the case coiled or on a spool t...

    D053010CMZ - Cable Feedthrough Dish Nouveaux!

    Image of D053010CMZ
    Image of D053010CMZ Image of D053010CMZ Image of D053010CMZ Image of D053010CMZ
    Rubber Cable Feedthrough Dish

    Use the plain dish in a case panel or the offset dish over extrusion to create a convenient cable feedthrough aperture.

    You can pass cabling that is stored inside the case coiled or on a spool through the rubber moulded flaps to hold it in place and prevent it from retreating back inside the case. With this dish, there’s no longer a need to take the cabling out or open the lid to unwind.

    Simply make the incisions you need along the pre-scored indentations to create one or several openings. Can be used as a single dish or as opposing pairs to create a larger space that can be reached into.
    Matériel: Steel/Rubber
    RéférenceFinitionDescription
    D053010CMZ Shopping CartZincHalf Dish
    D053710CMZ Shopping CartZincHalf Dish with Offset

    D0650 - Lid Dish for Rubber Feet Nouveaux!

    Image of D0650
    These steel lid dishes allow you to stack cases with rubber feet, providing a more secure and stable method than before.

    Compatible with all our rubber feet (does not work with 9106).

    D0650 - Lid Dish for Rubber Feet Nouveaux!

    Image of D0650
    Image of D0650 Image of D0650 Image of D0650 Image of D0650
    These steel lid dishes allow you to stack cases with rubber feet, providing a more secure and stable method than before.

    Compatible with all our rubber feet (does not work with 9106).
    RéférenceFinitionDescription
    D0650 Shopping CartPennBrite™Lid Dish for Rubber Feet

    R2120 Nouveaux!

    Image of R2120
    Rack box with removable back panel, 3mm / 1/8" Aluminium Front Panel, and Vented Top.

    Black with choice of Brushed Black Anodised or Brushed Silver Anodised Front Panel.

    R2120 Nouveaux!

    Image of R2120
    Image of R2120 Image of R2120
    Rack box with removable back panel, 3mm / 1/8" Aluminium Front Panel, and Vented Top.

    Black with choice of Brushed Black Anodised or Brushed Silver Anodised Front Panel.
    Matériel: 1.2mm Steel
    RéférenceSizeFront PanelDepth (D)
    R2120/1UK Shopping Cart1UBrushed Black Anodised220mm
    R2120/1US1UBrushed Silver Anodised220mm

    R2SP82 Slimline 4-Way Speaker Splitter Box Nouveaux!

    Image of R2SP82
    Made with high-grade steel, this slim profile drop box is ideal for running a single NL8 cable from the amplifier rack to your speaker stack. Enables the use of short link leads from the box to speakers for improved cable management, shorter lengths ...

    R2SP82 Slimline 4-Way Speaker Splitter Box Nouveaux!

    Image of R2SP82
    Image of R2SP82 Image of R2SP82 Image of R2SP82
    Made with high-grade steel, this slim profile drop box is ideal for running a single NL8 cable from the amplifier rack to your speaker stack. Enables the use of short link leads from the box to speakers for improved cable management, shorter lengths and less derigging time.

    Can be used as a single box per stack or multiple boxes chained for larger stacks or custom wired for many pin or pin swap options.

    In: 1x NL8

    Out: 4x NL4

    NL8MP input running from + 1- 1 ,2,3 & 4 wired to each NL4 on pins +1-1
    RéférenceFinitionDescription
    R2SP82 Shopping CartBlackSpeaker Splitter NL8MP NL2 x 4 Nouveaux!

    R2SP842 Slimline 6-Way Speaker Splitter Box Nouveaux!

    Image of R2SP842
    Made with high-grade steel, this slim profile drop box is ideal for running a single NL8 cable from the amplifier rack to your speaker stack. This model offers two extra NL4 outputs for speakers on 4core to break out in the box. Enables the use of sh...

    R2SP842 Slimline 6-Way Speaker Splitter Box Nouveaux!

    Image of R2SP842
    Image of R2SP842 Image of R2SP842 Image of R2SP842
    Made with high-grade steel, this slim profile drop box is ideal for running a single NL8 cable from the amplifier rack to your speaker stack. This model offers two extra NL4 outputs for speakers on 4core to break out in the box. Enables the use of short link leads from the box to speakers for improved cable management, shorter lengths and less derigging time.

    Can be used as a single box per stack or multiple boxes chained for larger stacks or custom wired for many pin or pin swap options.

    In: 1x NL8

    Out: 2x NL4, 4x NL4

    NL8MP input running from + - 1 ,2,3 & 4 wired to, two NL4’s on pins +- 1 & 2 going to the 4x NL4’s on pin +- 1
    RéférenceFinitionDescription
    R2SP842 Shopping CartBlackSlimline 6-Way Speaker Splitter Box Nouveaux!

    2017MP - Nouveaux!

    Image of 2017MP
    Multi-position surface mount twist latch protector plate with protective ridges. (Latch not included)

    The multiple mounting hole patterns enable the latch to operate with catch plates when used with 3/8", 1/2" or 3/4" plywood...

    2017MP - Nouveaux!

    Image of 2017MP
    Image of 2017MP Image of 2017MP Image of 2017MP
    Multi-position surface mount twist latch protector plate with protective ridges. (Latch not included)

    The multiple mounting hole patterns enable the latch to operate with catch plates when used with 3/8", 1/2" or 3/4" plywood.

    Works with large twist latches 7536, 7538 and 7568.
    RéférenceFinitionDescription
    2017MPZincMulti-position surface mount twist latch protector Nouveaux!

    AIR-TOP-STR Nouveaux!

    Image of AIR-TOP-STR
    Straight piece for AIR-AMP-CUBE Topper

    It takes some revolutionary tech to outperform traditional sound isolation boxes and with the modular and lightweight AirHush panels, the Cube has to be seen (and not heard) to be believed. Capable ...

    AIR-TOP-STR Nouveaux!

    Image of AIR-TOP-STR
    Straight piece for AIR-AMP-CUBE Topper

    It takes some revolutionary tech to outperform traditional sound isolation boxes and with the modular and lightweight AirHush panels, the Cube has to be seen (and not heard) to be believed. Capable of hugely reducing sound egress, instruments played through the isolated amplifier can be recorded with a 40db exterior signal transmission loss.

    Able to be constructed in minutes and packed away for storage, the modular system makes the Cube perfect for studios and live rooms alike.

    Special Order Outside the USA

    RéférenceDescription
    AIR-TOP-STR Shopping CartStraight piece for AIR-AMP-CUBE Topper

    AIR-TOP-COR Nouveaux!

    Image of AIR-TOP-COR
    Corner piece for AIR-AMP-CUBE Topper

    It takes some revolutionary tech to outperform traditional sound isolation boxes and with the modular and lightweight AirHush panels, the Cube has to be seen (and not heard) to be believed. Capable of...

    AIR-TOP-COR Nouveaux!

    Image of AIR-TOP-COR
    Corner piece for AIR-AMP-CUBE Topper

    It takes some revolutionary tech to outperform traditional sound isolation boxes and with the modular and lightweight AirHush panels, the Cube has to be seen (and not heard) to be believed. Capable of hugely reducing sound egress, instruments played through the isolated amplifier can be recorded with a 40db exterior signal transmission loss.

    Able to be constructed in minutes and packed away for storage, the modular system makes the Cube perfect for studios and live rooms alike.

    Special Order Outside the USA

    RéférenceDescription
    AIR-TOP-COR Shopping CartStraight piece for AIR-AMP-CUBE Topper

    L905/928SMOL3 Nouveaux!

    Image of L905/928SMOL3
    Medium MOL®3 Latch in Plain or Offset Dish

    - Automatic Open/Close System
    - Low Profile / Flat Cam Technology
    - Latch Retainer Safety Feature

    Suits ...

    L905/928SMOL3 Nouveaux!

    Image of L905/928SMOL3
    Image of L905/928SMOL3 Image of L905/928SMOL3
    Medium MOL®3 Latch in Plain or Offset Dish

    - Automatic Open/Close System
    - Low Profile / Flat Cam Technology
    - Latch Retainer Safety Feature

    Suits L0906 Backplate

    Matériel: 1.2mm Steel
    RéférenceFinitionDescriptionDish DepthOffsetLocakblePoids
    L905/928SMOL3 Shopping CartPennBrite™Plain Dish14mm / 1/2"NoNo0.22kg
    L978/928SMOL3PennBrite™Offset Dish14mm / 1/2"22mmNo0.22kg
    L907/928SMOL3PennBrite™Offset Dish14mm / 1/2"27mmNo0.22kg
    L9075/928SMOL3PennBrite™Offset Dish14mm / 1/2"Bottom 27mmNo0.22kg
    L905/928/10SMOL3PennBrite™Plain Shallow Dish10mmNoNo0.21kg
    L907/928/10SMOL3PennBrite™Offset Shallow Dish10mm27mmNo0.21kg
    L9075/928/10SMOL3PennBrite™Offset Shallow Dish10mmBottom 27mmNo0.21kg

    AIR-ROOM Nouveaux!

    Image of AIR-ROOM
    Sound isolation has become a breeze thanks to the clever air-filled AirHushpanels –fair lighter than traditional solid options.

    These modular, constructible booths are easily transportable and take acoustic management to the next level w...

    AIR-ROOM Nouveaux!

    Image of AIR-ROOM
    Image of AIR-ROOM Image of AIR-ROOM Image of AIR-ROOM Image of AIR-ROOM
    Sound isolation has become a breeze thanks to the clever air-filled AirHushpanels –fair lighter than traditional solid options.

    These modular, constructible booths are easily transportable and take acoustic management to the next level with incredible performance.

    Special Order Outside the USA

    RéférenceDescription
    AIR-ROOM-39 Shopping CartAIR-ROOM made out of 39 Panels
    AIR-ROOM-45 Shopping CartAIR-ROOM made out of 45 Panels
    Penn Elcom Logo