木箱配件

可提供第三方测试机构

检验报告
卡板气垫。轻松安装在卡板和柳条上，提供防震保护。

PE材质经久耐用和耐腐蚀。
不同颜色提供不同的负重能力
请看表.

适合 5/16-18 UNC 螺栓(可选不带T-形螺母的)

用增高垫 6228 使气垫高度增加到96毫米

卡板气垫增高垫，适用于 6035 - 6225 卡板气垫


使气垫高度增加到96毫米

Series 7 Air-Dampened Pallet Cushions.

Cushion Height: 2-7/8" / 73mm
Cushion + Spacer = 4” / 102mm

Use Spacer 7228

Our Pallet Cushions are the most economical and reliable way to replace and upgrade wooden skid runners on pallet crates, eliminating the need for costly air-ride trucks, these air-dampened polyethylene cushions are easily attached to pallets or crates to provide a high level of protection from shock and vibration.
Don’t risk shipment damage by shocks, drops, and impact during transit or handling.

Easy to Install
The pre-installed t-nut, with a 5/16”-18 UNC thread, protrudes out of the cushions for easy location into the mounting hole and fast installation. (Also available with an M8 threaded t-nut or without t-nut)
The pallet cushions are mounted directly on a pallet or container base with a simple bolt.

Reusable
The pallet cushions can be easily removed and mounted again on another pallet.
Simple and Practical
Our Series 7 Pallet Cushions, once fitted with the 7228 Spacer, create a four-way 4” space under the pallet, which makes it easy to load and unload with a pallet jack and forklift.

Textured Finish
The Series 7 Pallet Cushions has a textured finish for a better grip.

Resistant and Durable
Our Pallet Cushions have been through rigorous stress tests. They can be dragged on concrete and joints for 3000 feet, at maximum load, with only minimal wear noted. Suitable for use between -104°F and +130°F (-40°C to + 54°C) and chemical resistant.

Pallet Cushion Spacer to Suits 7035 - 7225 Pallet Cushions.

Spacer Height: 1-1/8" / 28.6mm
Increases cushion height to 4" / 102mm

栈板合页，插销可被取出

尺寸：220毫米 x 87毫米 x 1.5毫米

皮带式合页

大号栈板滑轨

116mm x 90mm

用叉车的时候，为没有脚轮或者可移动脚轮的箱子提供便利，

重负荷橡胶包角，内部有铁片

大线形弹簧扣#4

中线形弹簧扣#3

小线形弹簧扣#2

弹簧扣 #1

弹簧扣 #2

弹簧扣 #2不带凹孔

重负荷152.4毫米 挂锁搭扣

成套出售

Flat Cam大平面安装蝴蝶锁. 可挂锁的.

适用于 0371钩片（需另外购买）

平面安装大号蝴蝶锁，带保护脊

可选安装好蝴蝶锁的 2017-7568。

Multi-position surface mount twist latch protector plate with protective ridges. (Latch not included)

The multiple mounting hole patterns enable the latch to operate with catch plates when used with 3/8", 1/2" or 3/4" plywood.

Works with large twist latches 7536, 7538 and 7568.

大号平面安装扭转锁 7568，安装到 2017带保护脊保护片上
2017保护片也可以单独售卖
跟 0371搭配使用（需单独购买）

小号平面安装蝴蝶锁. 可挂锁的.

适用于 0334 钩片（需单独购买）

Flat Cam大平面安装蝴蝶锁.

适用于 0371钩片（需另外购买）

大平面安装蝴蝶锁. 可挂锁的

适用于 2011钩片（需另外购买）

大平面安装蝴蝶锁.

适用于 0371钩片（需另外购买）

大平面安装蝴蝶锁.

适用于 0371钩片（需另外购买）

小号平面安装蝴蝶锁,可见装孔.
适用于 0334钩片（需单独购买）

小号平面安装蝴蝶锁 可见装配孔.

适用于 0334 钩片（需另外购买）

中蝴蝶锁.
勾片需要另外购买

中蝴蝶锁，带箱盖安装钩片

适用于厚度18毫米以上的木板。

小号和中号锁的勾片

重负荷平面安装钩片。