Rolling Drum Riser

Other sizes and heights available

Surface mounted high depth aluminium extrusion suitable for LED strips not wider than 12mm.

New aluminium track from Comus LED to be used with OSRAM LINEARlight Flex or other LED modules. The track works as an excellent heat sink, providing optimum cooling of LED modules for long life and high reliability.

The tracks can be shortened to the desired length.

Included in the KIT:
- LEDAL15A - Aluminium Extrusion
- LEDAL15DC - Diffuse Cover
- LEDAL15EC - 1 x End Cap without hole
- LEDAL15ECH - 1 x End Cap with hole for cable entry
- LEDAL15MB - 2 x Metal Mounting Bracket

Features:
- Aluminium anodized track for LED Flex or LED modules
- Low weight
- Easy and fast assembly and connection
- Suitable for LED strips not wider than 12mm

Advantages:
- Excellent heat sink providing long life and reliabilityfor LED
- Easy installation of the LED Flex or modules
- 1 year Warranty.

Application area:
- Edge lighting;
- Strip lighting;
- Cove lighting;
- Anywhere LED Flex or an LED module needs extra support.

Dimensions
- Height: 15mm
- Width (Base): 17.5mm
- Width (Interior): 12.2mm
- Base thickness: 0.8mm
- Cover material: Polycarbonate

Self-Adhesive Gasket for 4756 Recessed Latch

Large Ball Corner with new interlocking cut-outs. Enables cases to stack and lock without slippage.

With 30mm Offset

Internal Radius: 0.5mm / 1/32"

Industrial grade powered lift column with quad point adjustable dampening designed for flight case integration

Features:
- Tip Resistant Supports
- Ultra Wide Steel 9.5mm Base
- Maximum Load: 136kg / 300lb
- Quad Industrial Grade Adjustable Dampeners
- Vertical Travel: 685.8mm / 27”

Download Spec Sheet below for more information

Slim corner surface mounted aluminium extrusion suitable for LED strips not wider than 10mm.

New aluminium track from Comus LED to be used with OSRAM LINEARlight Flex or other LED modules. The track works as an excellent heat sink, providing optimum cooling of LED modules for long life and high reliability.

The tracks can be shortened to the desired length.

Included in the KIT:
- LEDAL03A - Aluminium Extrusion
- LEDAL03DC - Diffuse Cover
- LEDAL03EC - 1 x White End Cap without hole
- LEDAL03ECH - 1 x White End Cap with hole for cable entry
- LEDAL03MB - 2 x mounting brackets

Features:
- Aluminium anodized track for LED Flex or LED modules
- Low weight
- Easy and fast assembly and connection
- Suitable for LED strips not wider than 10mm

Advantages:
- Excellent heat sink providing long life and reliability for LED
- Easy installation of the LED Flex or modules
- 1 year Warranty.

Application area:
- Edge lighting
- Strip lighting
- Cove lighting
- Anywhere LED Flex or an LED module needs extra support

Dimensions
- Height: 16mm
- Width (External): 16mm
- Width (Internal): 10mm
- Base thickness: 0.8mm
- Cover material: Polycarbonate

Free your imagination with this high quality, flexible and innovative FLEX tape of LEDs. Designed for lighting professionals, it has a high luminous flux of up to 3,000 lm/m and fine white of 3 SDCM.

This flexible, cuttable strip of high quality LED light, has a self-adhesive strip on the back making it easy to apply to most smooth surfaces.

It matches OPTOTRONIC 24 V electronic control gears, and is dimmable with many common dimmers. It has many applications including architectural lighting, cove lighting and ceiling integration, and opens up a new world of possibilities for anybody creating a bold, modern and innovative LED installation, however challenging.

Product benefits
- Large selection of light colors
- Great design freedom thanks to flexibility and cuttability of module
- Simple mounting and connection
- Toolless connection with the optional CONNECTsystem
- Easy mounting on many smooth surfaces thanks to self-adhesive tape at the back
- High luminous flux
- Extraordinary design and high quality materials
- Type of protection: IP00

Product features
- Flexible and cuttable LED strip
- Luminous flux: up to 3,000 lm/m
- Module efficacy: up to 138 lm/W
- Dimmable with PWM technology
- Fine White (3 SDCM)

Areas of application
- Architecture lighting
- Cove lighting
- Ceiling integration

Equipment / Accessories
- Simplified connection with optional matching CONNECTsystem
- Quick installation with optional SLIM TRACK System
- Perfectly matched to OPTOTRONIC 24 V electronic control gears
- LED flex is required to be mounted into track to allow for effective heat dissipation.

Single Angle Extrusion

30mm legs

Double Angle Extrusion
· 30mm x 30mm
· Board thickness: 10.3mm
· Equal inside legs for stronger construction

Lidmaker Extrusion
Board thickness: 10.3mm

Hybrid Extrusion
Board thickness : 7.7mm

Black lever latch with pop up lever mechanism.

4 Hole Brace with Two Radius

Dimensions:
- 29mm x 40mm x / 1 1/8" x 1 9/16"
- Internal Radius: 2mm and 5mm

Hinged Corner Brace, based on B1130-25 Large Brace

The new R50335 is a door hinge mounted on a drawer slide that allows you to slide a trap door within a rackmount case when in use. With a simple panel and a slam lock, you can easily create a door that can be hidden within the case when opened. Perfect to build standard 600mm x 600mm / 23.5" x 23.5" shock mount rack cases

For use with R8800 Anti-Vibration Rack Systems: the easiest way to build a shock mount rack case.

For use with 30mm / 1 3/16" extrusions.

CROSS 5 is more than just a crossover. Forged from high quality thermoplastic polyurethane (TPU), CROSS 5 is a five channel crossover system that gives you unrivalled strength, abrasion resistance and flexibility, with NEW fire retardant technology.
Its ingenious design enables a wide variety of crossover combinations, whatever your cable management needs. The two elements that enable this system are the base section and the ramp section.

BASE SECTION: The base sections acts as a connector piece, from which many combinations of cross over systems can be created.

RAMP SECTION: The ramp section has a 15° angle of inclination, the optimal angle for vehicles to drive over.

KEY FEATURES:
• Highly tear-proof and high form stability.
• Indented channel ridges to prevent the lid bowing under pressure.
• Resistant to most oils, fats and chemicals.
• Fire retardant (DIN EN 13501-1).
• Can withstand 5 tonnes of direct pressure.
• Coloured lids can be changed.
• Fixed lid in drive over position.
• Quick and easy assembly.
• MAX PERFORMANCE: anti-sliding pads available for hexagonal base.

Deep Clamp Bar for use with rack shelves with side slots

Works with:
- Rack Shelf With Custom Face Plate
- R1297-152, R1297, R1297-500, R1297-600 and R1397 Clamping Rack Shelves
- R1288 Utility Shelves
- R1194/3UK, R1194/4UK, RSU0x, RSU0x-600 Rack Shelves

Includes Foam Strip and Fixing Screws.

2U 20 Amp Rack Mount PDU with Power Monitoring & Overload Protection

2U high Horizontal Mounting unit designed to provide versatile hook-up for the distribution
of AC power within Audio Visual & Multimedia applications.


Main Input
- Neutrik 20A powerCON with 2nd order EMI filter & GDT/VDR protection circuit against Lightning Strike & Local Power Surge

Circuit A:
- Protection: Illuminated Circuit Breaker 10A overload protection
- Output: 4 Way IEC C13 Outlet Strip with max combined load of 10A 2 Dual USB 5V 1.8A charger modules

Circuit B:
- Output - 5 Universal sockets useable with plugs from the UK, US, Europe and Australia, with a maximum Combined Load 10A. (Schuko type plugs have a 2 pin connection only) For full universal plug application guide see appendix A
- Protection: Illuminated Circuit Breaker 10A overload protection
- LCD Monitor: LCD Power Monitor giving Voltage, Current , Power & Energy Levels.
- Earth Link: M4 Screw Terminal for Rack Grounding

Usage:
- Nominal Voltage: 230V
- Usable Voltages 240V full range
- Frequency: 50/60HZ full range
- Max. A/C Output: Current 20A
- Case Size: 87mm x 98mm x 430mm

Compliance All components used in this conform to current RoHS, CE & UL certification - E&OE
(EMI:EN55022 (CISPR22) Class B; EN61000-3-2,3 EMS:EN61000-4-2,3,4,5,6,8,11; Light industry level, criteria A)

Warnex textured paint for loudspeakers. 1kg cans.

- Robust surface protection for all types of wood-based materials
- Slightly grainy decorative structures
- Fast air drying
- Environmentally friendly (water-dilutable)
- Easy application (only one component)

Warnex textured paint for loudspeakers. 6kg cans.

- Robust surface protection for all types of wood-based materials
- Slightly grainy decorative structures
- Fast air drying
- Environmentally friendly (water-dilutable)
- Easy application (only one component)

Moulded plastic trim.

Perfect for cable exit holes.

Plastic Moulded Surface Latch Protector.
With 25mm offset.

Fits most small and medium surface latches

New 4-Stage Telescopic Pull-Out Handle that has been designed to perfectly fit the profile of the N-Case 2 and the N-Case Exo.
Locks in all 4 stage positions.
Load Capacity: 34kg

Black or grey self-adhesive carpet
1.4m x 60m / 4'7" x 196'10" rolls

Also available cut to specific M lengths

Industrial grade powered lift column with 12pt integrated dampening.

Features:
- Fits screens from 32" to 65"
- Maximum Load: 60kg / 135lb
- With omnidirectional shock resistant wall brackets
- VESA: 100mm x 100mm - 600mm x 400mm
- Vertical Travel: 914.4mm / 36”
- Total Travel Time: 35 Sec
- Max Speed at Full Load: 22mm / 0.866” per second

Download Spec Sheet below for more information

Spot free surface mounted aluminium extrusion suitable for LED strips not wider than 16mm or 2 x 8mm.

New aluminium track from Comus LED to be used with OSRAM LINEARlight Flex or other LED modules. The track works as an excellent heat sink, providing optimum cooling of LED modules for long life and high reliability.

The tracks can be shortened to the desired length.

Included in the KIT:
- LEDAL30A - Aluminium Extrusion
- LEDAL30DC - Diffuse Cover
- LEDAL30EC - 1 x White End Cap without hole
- LEDAL30ECH - 1 x White End Cap with hole for cable entry
- LEDAL30MB - 2 x Metal Mounting Bracket

Features:
- Aluminium anodized track for LED Flex or LED modules
- Low weight
- Easy and fast assembly and connection
- Suitable for LED strips not wider than 16mm or 2 x 8mm

Advantages:
- Excellent heat sink providing long life and reliability for LED
- Easy installation of the LED Flex or modules
- 1 year Warranty.

Application area:
- Edge lighting;
- Strip lighting;
- Cove lighting;
- Anywhere LED Flex or an LED module needs extra support.

Dimensions
- Height: 21mm
- Width (External): 21mm
- Width (Internal): 16.8mm
- Base thickness: 1mm
- Cover material: Polycarbonate

Free your imagination with this high quality, flexible and innovative FLEX tape of LEDs. Designed for lighting professionals, it has a luminous flux of up to 2,000 lm/m and fine white of 3 SDCM.

This flexible, cuttable strip of high quality LED light, has a self-adhesive strip on the back making it easy to apply to most smooth surfaces.

It matches OPTOTRONIC 24 V electronic control gears, and is dimmable with many common dimmers. It has many applications including architectural lighting, cove lighting and ceiling integration, and opens up a new world of possibilities for anybody creating a bold, modern and innovative LED installation, however challenging.

Product benefits
- Large selection of light colors
- Great design freedom thanks to flexibility and cuttability of module
- Simple mounting and connection
- Toolless connection with the optional CONNECTsystem
- Easy mounting on many smooth surfaces thanks to self-adhesive tape at the back
- Extraordinary design and high quality materials
- Type of protection: IP00

Product features
- Flexible and cuttable LED strip
- Luminous flux: up to 2,000 lm/m
- Module efficacy: up to 147 lm/W
- Dimmable with PWM technology
- Fine White (3 SDCM)

Areas of application
- Architecture lighting
- Cove lighting
- Ceiling integration

Equipment / Accessories
- Simplified connection with optional matching CONNECTsystem
- Quick installation with optional SLIM TRACK System
- Perfectly matched to OPTOTRONIC 24 V electronic control gears
- LED flex is required to be mounted into track to allow for effective heat dissipation.

Free your imagination with this high quality, flexible and innovative FLEX tape of LEDs. Designed for lighting professionals, it has a luminous flux of up to 1,200 lm/m and fine white of 3 SDCM.

This flexible, cuttable strip of high quality LED light, has a self-adhesive strip on the back making it easy to apply to most smooth surfaces.

It matches OPTOTRONIC 24 V electronic control gears, and is dimmable with many common dimmers. It has many applications including architectural lighting, cove lighting and ceiling integration, and opens up a new world of possibilities for anybody creating a bold, modern and innovative LED installation, however challenging.

Product benefits
- Large selection of light colors
- Great design freedom thanks to flexibility and cuttability of module
- Simple mounting and connection
- Toolless connection with the optional CONNECTsystem
- Easy mounting on many smooth surfaces thanks to self-adhesive tape at the back
- Extraordinary design and high quality materials
- Type of protection: IP00

Product features
- Flexible and cuttable LED strip
- Luminous flux: up to 1,200 lm/m
- Module efficacy: up to 152 lm/W
- Dimmable with PWM technology
- Fine White (3 SDCM)

Areas of application
- Architecture lighting
- Cove lighting
- Ceiling integration
- Wall integration

Equipment / Accessories
- Simplified connection with optional matching CONNECTsystem
- Quick installation with optional SLIM TRACK System
- Perfectly matched to OPTOTRONIC 24 V electronic control gears
- LED flex is required to be mounted into track to allow for effective heat dissipation.

This flexible, cuttable strip of LEDs, with a self-adhesive strip on the reverse for easy mounting, has been created with freedom of design and light inspiration in mind. It can increase the scope of your professional and industrial lighting installations quickly and easily, letting you design in light wherever you need it.

Easy to flex and cut to size, it is made from performance silicone, protected to IP67 and resistant to salt mist and UV, which means it is suitable for outdoor use.

LINEARlight FLEX DIFFUSE 400 gives you lines of diffuse light, without visible spots, and you can run up to 6 meters from a single power feed. It is great for individual, customized and organically-shaped luminaires, architectural integration of walls and coves, and object integration (e.g. handrails), it can be dimmed with PWM technology, and it is a perfect match for OPTOTRONIC 24 V electronic control gears.

Product features
- Diffused light lines without visible spots
- Flexible and cuttable module to support design freedom
- Long operational length per single power feed possible (up to 6m)
- Ideal for luminaire designs
- Extra strong self-adhesive backside for easy mounting
- 24V technology for easy dimensioning
- Recommended in system use with OPTOTRONIC
- Increased reliability due to single piece reel-to-reel technology
- Dimmable with PWM technology

Product benefits
- IP67 protection with high performance silicone
- Outdoor use possible: UV and salt mist resistant (UV acc. to ISO 4892-2 - Method A, salt - mist acc. to IEC 60068-2-52 severity 1)

Areas of application
- Individual and customized luminaires
- Organic shaped luminaires
- Architectural Integration – e.g. coves, walls
- Object integration – e.g. handrails
- Signage and illuminated advertising
- Drivers, power feeds, mounting brackets and end caps are available

1/4" Tongue Extrusion mates with 3019 Groove Extrusion.
Board thickness: 7.6mm

Fits Most Domestic Laminates.